Advertisement
RN42221MUK Rev4_IB 02/07/2013 15:22 Page 5
Using the Steam Generator for steam ironing
If steam ironing, remove the detachable water
tank (8), lift the filling cap (7), and fill with water
to the max fill line. Replace the water tank.
Turn the temperature dial
(see Temperature guide on page 4). The
temperature indicator light
the temperature is reached. Begin ironing when
the temperature indicator light
you turn the temperature dial
the temperature indicator light
then goes off again.
Steam boost button (certain models only)
1
1
Do not combine the two steam functions. Using the two buttons together will interrupt the flow of
steam and may result in the constant steam cutting out completely. For optimum steam output, use
each steam function separately and as detailed above.
1 1
3
(3)
to suit the garment
(5)
illuminates until
(5)
goes out. If
(3)
down, wait until
(5)
illuminates and
The steam boost function is ideal for relaxing the
fibres of tougher fabrics (like jeans and linen) and
getting rid of those stubborn, hard to reach creases.
To produce a quick, powerful shot of steam during
ironing, simply press and release the steam boost
button (1).
NOTE: After using the steam boost function, your
steam generator iron will require up to 5 seconds to
reheat before it can produce a second boost of
steam. If you require a high level of constant steam,
choose the appropriate steam level and use the
steam trigger
Plug the appliance into a mains outlet and press
the On/Off button
(16)
to activate the unit.
Press the relevant steam button
select desired steam level. The steam button will
stop flashing and illuminate constantly when the
steam level is reached.
For a strong, continuous flow of steam during
ironing, press and hold the steam trigger
deliver steam through the soleplate.
WARNING: The steam supply cord
get hot during use.
(2)
as instructed above.
2
4
4
2
2
(20/21/22)
to
(2)
to
(23)
will
5
Advertisement
