Table of Contents
Advertisement
User Manual OMNI960 Digital Video Recorders
5.7 Configuring Redundant Record
Purpose:
Enabling redundant recording, which means saving the record files not only in the R/W (read/write) HDD but
also in the redundant HDD, will effectively enhance the data safety and reliability. Requires multiple HDDs.
Note:
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD
property to Redundant. For detailed information, please refer to Chapter 10.4 Managing HDD Group. There
should be at least another HDD (NetHDD) which is in R/W mode.
Steps:
1. Enter HDD Information interface.
Menu> HDD
2. Select the HDD and click
1) Set the HDD property to Redundant.
2) Click Apply to save the settings.
3) Click OK to back to the upper level menu.
3. Enter the Record setting interface.
Menu> Record> Encoding
1)
Select Record.
Figure 5.30 HDD General
to enter the Local HDD Settings interface.
Figure 5.31 HDD General-Editing
62
Advertisement
Table of Contents
