Yardbeast YB2510 User Manual page 14

3. All settings (blade, anvil, etc.) should
be checked at least once before
each use.
4. Periodically check all bolts, nuts, safety
pins, etc.
WARNING
Stop the engine and disconnect
the spark plug before servicing
equipment.
Lubrication
1. Lubricate the rotating elements such as
rotor, bearings once a season.
2. Follow engine
lubrication instructions.
Wood Chipper Maintenance
Schedule Chart
Before each use
•Check power belt
• Check blade and anvil
Every 25 hours
• Bearings are sealed so they don't need
lube
• Regrind blade
• Regrind anvil
Engine Maintenance
Use only original spare parts for the engine.
Other parts may not perform as well
damaging the unit; and may cause injury.
Moreover, the use of other parts may void
your warranty.
Exhaust Gases Control
Maintenance, replacement or repair of
devices and emission control systems may
be performed by
authorized establishment for these engines.
Refer to engine manual for more information
manual for engine
any manufacturer
or contact us. We will be glad to help.
WARNING
Unintentional sparking can result in
fire or electric shock.
Before making adjustments or repair
into the unit.
Disconnect the spark plug.
•
• Disconnect battery at negative terminal
(only engines with electric start).
• Use only correct tools.
• Replacement parts must be the same and
installed in the same position as the original
parts.
• Do not strike the flywheel with a hammer
or hard metal object. Bearings suffer the
load.
When checking for sparks
•Use an approved tester.
•Do not check for spark with spark arrestor
removed.
Engine Maintenance Chart.
First 5 hours of use
Change oil
•
Every 8 hours of use
•Check Oil Level
•Clean area around exhaust,controls and air
intake.
•Clean recoil grille
Every 25 hours of use
•Clean air filter**
•Clean pre-filter (if fitted)
Every 50 hours of use
•Change oil
•Replace Oil Filter
•Check muffler and spark arrestor
Annually
•Change air filter.**
•Replace pre-filter (if equipped)
•Replace spark plug
•Clean air cooling components
•Replace Fuel Filter (if equipped)
•Check valve tolerance*
14