1. Manuals
  2. Brands
  3. Yardbeast Manuals
  4. Chipper
  5. YB2510
  6. User manual

Yardbeast YB2510 User Manual

Heavy duty wood chipper
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
©
User Manual
Heavy Duty Wood Chipper
2.5"
YB2510
WARNING
Read and follow all instructions in this manual before attempting
to operate this machine. Please keep this manual available for
consultation at any time. Read it thoroughly and become familiar
with the operating instructions, maintenance and security
indications. Failure to follow these instructions can result in serious
injury to yourself and others.
Rederick Metal Industries Corp.
1925 NW 21st Terrace
Miami, FL 33142
www.yardbeast.com | (305) 396-3396
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the YB2510 and is the answer not in the manual?

Questions and answers

Related Manuals for Yardbeast YB2510

Summary of Contents for Yardbeast YB2510

  • Page 1 Read it thoroughly and become familiar with the operating instructions, maintenance and security indications. Failure to follow these instructions can result in serious injury to yourself and others. Rederick Metal Industries Corp. 1925 NW 21st Terrace Miami, FL 33142 www.yardbeast.com | (305) 396-3396...

  • Page 2: Table Of Contents

    THANK YOU! INDEX We are very grateful that have Important safety measures……………..3 purchased a wood chipper manufactured by us. The same has been designed and Assembly of the 2510…………………..….8 carefully fabricated to give you excellent performance, great reliability and exceed Controls and Features…………………….11 your expectations.

  • Page 3: Important Safety Measures

    You can choose the options that are expressed within. presented below: 1925 NW 21 ST TERRACE, Miami, FL 33142 /Phones: (305)-396-3396/ web site: www.yardbeast.com IMPORTANT SAFETY MEASURES This machine is designed to be used in compliance with safety regulations contained in this manual.
  • Page 4 ONLOOKERS AWAY AT: Wear Ear Protection Wear Eye Protection Wear Safety Gloves 30 ft. No hands beyond Caution this point INSPECT BLADES BEFORE EACH USE Protective equipment required for the operation of this equipment. •Safety goggles •Safety gloves • Hearing protection. •...
  • Page 5 contained in this manual. No persons below years age should operate this AVOID SLOPES equipment. 4. Without receiving appropriate instructions, do not allow anyone to operate this machine. 5. Do not turn ON the chipper in closed spaces or in an area with little ventilation. The gases from the engine exhaust contain carbon monoxide, a lethal gas which is odorless.
  • Page 6 4. Use work gloves with palm of leather or while the engine is hot or running . Allow engine to cool at least two minutes industrial cotton when you feed the material before re- fueling . into the hopper. Before you turn on the machine, check all bolts and accesories to 7.

  • Page 7: Maintenance And Storage

    7. Do not operate this machine while under the influence of alcohol or drugs. 5 . Do not change the engine governor settings or overspeed the same . The 8. Never operate this machine without good governor controls the maximum safe visibility or light .

  • Page 8: Assembly Of The 2510

    2 Axles (Rotating, Fixed) 4 Wheels Manuals and Operator safety accesories. Assembly of the YARDBEAST 2510 Note: This unit is shipped without fuel and without oil in the engine. Fill with either diesel fuel or gasoline (depending on the engine...
  • Page 9 -Inserting rotating axle and boltit as shown in Figure below. a. 4 Hex Bolts 3/8 "x 1" b. 4 Hex Nuts 3/8 " c. 4 Pressure Washers 3/8 " d. Plain Washers 4 3/8 " Pull Assembly -Next figure shows the assembly of the pull bar..
  • Page 10 Nuts and bolts: a. 1 Carriage Bolt 1/4 "x 1" b. 1 Pressure washer 1/4 " c. 1 Hex nut 1/4 " Discharge Assembly 1.Locate discharge neck as shown in the figure and secure it to the chipper. 2.Make sure the carriage bolts are placed inside out so the head is inside the Setting up your Wood Chipper discharge.

  • Page 11: Controls And Features

    ADVERTENCIA extreme caution when These are some of the wood chipper handling fuel. Fuel highly features and controls you should be aware flammable and the vapors are of to familiarize yourself with the chipper. explosive. Never fuel the machine indoors or while the engine is running or hot. It is very important you understand its Extinguish cigarettes, cigars, pipes and other components for a safe operation of the...

  • Page 12: Operation

    use safety protection, this chipper and body damage. expels wood chips with great force by design. OPERATION Working with your Wood Chipper IMPORTANT: Never place wood in the hopper with a diameter greater than 2-1/2 ". The material to be chipped enters the Doing so could damage the blades and cutting area through the feed hopper jeopardize the integrity of the machine.

  • Page 13: Maintenance And Adjustment

    6. Once the engine starts to run, quickly turn the throttle lever (choke) to the RUN position. 7. If for some reason the rotor stops spinning, the engine loses power but it doesn not shut down, is because this chipper is equipped with a centrifugal clutch that only engages when it passes a certain amount of RPMs.
  • Page 14 3. All settings (blade, anvil, etc.) should or contact us. We will be glad to help. be checked at least once before WARNING each use. Unintentional sparking can result in fire or electric shock. 4. Periodically check all bolts, nuts, safety pins, etc.

  • Page 15: Servicing

    ** Clean filters and air intakes more often in intake system to allow proper air dusty conditions or when there is high circulation. Remove all grass, dirt density of airborne and combustible debris from muffler * Not required unless engine performance area.
  • Page 16 Please contact us at: an oil-soaked cloth for cleaning all equipment. The cover the chipper with a www.yardbeast.com big plastic bag to prevent the environmental conditions from harming the (Customer Contact Form) equipment.

  • Page 17: Troubleshooting

    TROUBLESHOOTING Problem Cause Solution 1. The spark plug is disconnected 1. Connect the cable to spark plug. 2. The fuel tank is empty. 2. Fill tank with clean, fresh fuel. Engine does 3. Shut-off valve is closed. 3. Turn the fuel valve ON not start 4.

  • Page 18: Parts Replacement

    SPARE PARTS LIST Component Part Number and Description # PART: 251001 | BLADE # PART: 251002 | ANVIL # PART: 251003 | KNOB # PART: 251004 | POWER BELT # PART: 251005 | CLUTCH # PART: 251006 | 10-INCH WHEEL...

  • Page 19: Warranty Information

    Rederick MI Corp. Dealers and/or channels of export distribution. e. Parts that are not genuine to the Yardbeast Chipper line will not be covered by this or any other warranty expressed by Rederick MI Corp.

  • Page 20: Parts List

    PARTS LISTT BASE Components Part No. Base 251007 Live axle 251008 Fixed axle 251009 Pull bar 251010 Belt tensioner 251011 Pull Bar Pin 251012 Pneumatic Wheel 10” x 5/8” 251006 Rubber grip 251013 DISCHARGE NECK Components Parto No. Discharge neck 251014 Deflector 251015...
  • Page 21 ROTOR Components Part No. Rotor 251016 Blade 251001 CHIPPER Components Part No. Bottom 251017 251018 Feed Hopper 251019 Bearing housing 251020 Dirt screen 251021 Anvil 251002 Open/Close Pin 251022 Lock safety tube 251023 Lock safety pin 251024 Spacers 251025 251003 Knob...
  • Page 22 BELT GUARD Component Part No. Belt Guard 251026 Large guard support 251027 Small guard support 251028 3/8 “ screw bar 251029 Nylon safety nut- 3/8” 251030 Plain washer - 3/8” 251031 251032 Pressure washer – 3/8”...
  • Page 23 NOTES:...

Table of Contents