Ramsey Medical statMAP Instructions Manual page 21

Blood Pressure Display and MAP (Mean Arterial
Pressure) to the nearest mmHg
The statMAP will indicate blood pressure at the end of each
measurement on the LED display to the nearest 5mmHg tick
mark. The multi-function button can be used to display the
BP measurement to the nearest 1 mmHg.
1) To display the systolic and diastolic pressures to the nearest
mmHg, press and hold the multi-function button down when
the BP values are displayed.
The systolic and diastolic pressures are indicated by the
bright LED (at a 5mmHg tic mark) plus or minus the number
of dimmer LEDs illuminated above or below the brightly lit
LED.
Example:
BRIGHT DIM
LED LED
120
125 (1 above)
80
2) Pressing and holding the multi-function down a second time
will display the MAP to the nearest mmHg.
The display will toggle between systolic/diastolic and MAP
each time the multi-function button is pressed.
75 (1 below)
DIM
LED
130 (2 above)
70 (2 below)
Page 21
BP VALUE
120 + 2 = 122
80 - 2 = 78