Introduction; Thermostat Operation; On/Off; Set Temperature - Smart temp SMT - 131 Manual

Introduction

The Smart Temp SMT-131 thermostat has been designed for use in hotel rooms and other
locations where the user may be unfamiliar with thermostat operations. In these applications it is
important that the thermostat be very intuitive, robust and attractive. The SMT-131 thermostat
has been designed with these important goals is mind.
The SMT-131 also offers advanced energy conservation features such as set point limit control,
un-occupied heating and cooling settings as well as Modbus RTU communications for integration
with the "Building Automation System" (BAS) or "Hotel Check In" system. Additionally, the SMT-
131 seamlessly interfaces with the Smart Temp OC-3D occupancy detection system and "Door
Station" system.

Thermostat operation

On/Off

Tap the On/Off button to turn the thermostat On or Off. (To ensure the simplest user operation
the user cannot select heating or cooling Mode directly).

Set Temperature

Adjust the target temperature with the Up or Down button.
Fan
Single fan speed mode (Sw1=Off)
Tap the fan button to cycle between auto fan and continuous fan mode.
Three fan speed mode (Sw1=On)
Tap the fan button to cycle between low, medium, high and auto fan speeds. Press and hold the
fan button to turn the fan on continuously.
The SMT-131 is an extremely simple thermostat to
operate and does not normally require a user
manual or user training.
The diagram to the left shows all LCD elements and
the 6 buttons (Up / Down / Make Up Room / Do Not
Disturb / On – Off / Fan Mode.
Depending on switch and installer menu settings
not all LCD segments maybe shown.
Page 3