Voice Message Retrieval - 3Com 56K User's Manual And Reference

Make sure you have completed your full message
before hanging up the handset or clicking Stop,
otherwise your message will not be recorded. Once
you have started recording your message with the
handset, you cannot switch to hands-free mode.

Voice Message Retrieval

Voice messages can be retrieved in three ways:
1) from the software application,
2) from the modem buttons, and
3) remotely.
Messages will be stored on the PC only when
retrieving them through the software application.
Messages can be transferred from the modem's
memory to your PC using your software application.
Fax messages stored in memory can only be retrieved
in your fax software application.
Product Features
Messages can be played back through either the
internal speaker (hands-free mode) or the connected
handset (handset mode) from the software
application and the modem buttons. Remotely,
recorded messages can be played back using the
handset of a remote touch-tone telephone. The
number of voice messages is indicated by a tone for
each new voice message. For example, if you have 4
new messages, you will hear 4 tones.
Fax messages will not be indicated by a tone.
1) from the software application
Hands-free mode
Select 'Microphone' and 'Modem Speaker' as
1.
the respective Input & Output devices from
within the supplied application software
Click Play to play back your message through
2.
the internal speaker.
3. Click Stop to end message playback.
Playback stops automatically at the end of the
4.
message.
9