Figure 29: Bandwidth Profile Configuration Page - D-Link DSR-250N User Manual

Unified Services Router

Figure 29: Bandwidth Profile Configuration page

Advanced > Advanced Network > Traffic Management > Traffic Selectors
Once a profile has been created it can then be associated with a traffic flow from the LAN to WAN.
To create a traffic selector, click Add on the Traffic Selectors page. Traffic selector configuration
binds a bandwidth profile to a type or source of LAN traffic with the following settings:
•
Available profiles: Assign one of the defined bandwidth profiles
•
Service: You can have the selected bandwidth regulation apply to a specific service (i.e. FTP)
from the LAN. If you do not see a service that you want, you can configure a custom service
through the
apply to all services, select ANY.
•
Traffic Selector Match Type: this defines the parameter to filter against when applying the
bandwidth profile. A specific machine on the LAN can be identified via IP address or MAC
address, or the profile can apply to a LAN port or VLAN group. As well a wireless network can
be selected by its BSSID for bandwidth shaping. In order to restrict services from all IP
addresses or specific subnets, the subnet mask field can be configured in conjunction with the
IP address to regulate inbound traffic.
Advanced > Firewall Settings > Custom Services
46
User Manual
page. To have the profile