Lan Dhcp Leased Clients; Lan Configuration In An Ipv6 Network; Figure 3: Lan Dhcp Leased Clients - D-Link DSR-250N User Manual

Unified services router
Hide thumbs Also See for DSR-250N:
Table of Contents

Advertisement

Unified Services Router

2.1.2 LAN DHCP Leased Clients

Setup > Network Settings > LAN DHCP Leased Clients
This page provides the list of clients connect to LAN DHCP server.

Figure 3: LAN DHCP Leased Clients

IP
Addresses:
MAC Addresses: The MAC address of a LAN host that has a configured IP address reservation.

2.1.3 LAN Configuration in an IPv6 Network

Advanced > IPv6 > IPv6 LAN > IPv6 LAN Config
(1) In IPv6 mode, the LAN DHCP server is disabled by default (similar to IPv4 mode). The
DHCPv6 server will serve IPv6 addresses from configured address pools with the IPv6 Prefix
Length assigned to the LAN.
IPv4 / IPv6 mode must be enabled in the
options.
LAN Settings
The default IPv6 LAN address for the router is fec0::1. You can change this 128 bit IPv6 address
based on your network requirements. The other field that defines the LAN settings for the router is
The
LAN
IP
address
Advanced > IPv6 > IP mode
of
a
host
that
17
User Manual
matches
the
reserved
to enable IPv6 configuration
IP
list.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents