Wan Configuration In An Ipv6 Network; Figure 25: Russia Dual Access Pppoe Configuration - D-Link DSR-250N User Manual

Unified Services Router

Figure 25: Russia Dual access PPPoE configuration

3.2.7 WAN Configuration in an IPv6 Network

Advanced > IPv6 > IPv6 WAN1 Config
For IPv6 WAN connections, this router can have a static IPv6 address or receive connection
information when configured as a DHCPv6 client. In the case where the ISP assigns you a fixed
address to access the internet, the static configuration settings must be completed. In addition to the
IPv6 address assigned to your router, the IPv6 prefix length defined by the ISP is needed. The
default IPv6 Gateway address is the server at the ISP that this router will connect to for accessing
the internet. The primary and secondary DNS servers on the ISP's IPv6 network are used for
resolving internet addresses, and these are provided along with the static IP address and prefix
length from the ISP.
When the ISP allows you to obtain the WAN IP settings via DHCP, you need to provide details for
the DHCPv6 client configuration. The DHCPv6 client on the gateway can be either stateless or
stateful. If a stateful client is selected the gateway will connect to the ISP's DHCPv6 server for a
leased address. For stateless DHCP there need not be a DHCPv6 server available at the ISP, rather
41
User Manual