KitchenAid KEYS677E Use And Care Manual page 7

Venting
(cont.)
4. Use the straightest path possible when routing the
5. Use duct tape to seal all joints. Do not use screws
Checking Your Vent
exhaust vent. Avoid 90°
turns, if possible. Allow
room when using
elbows or making turns.
Bend vent gradually to
avoid kinking.
to secure vent. Lint may
catch on screws.
6. Clean exhaust vent periodically, depending on use,
feather duster or rag attached, to clean out lint.
•
Be sure the flapper on the outside end of vent
moves freely.
•
When cleaning is complete, be sure to follow the
Installation Instructions supplied with your dryer
for final product check.
but at least every 2 years,
or when installing your
dryer in a new location.
• Disconnect vent from
the dryer and clean one
section at a time until
you reach the exhaust
hood.
• Use the hose attach-
ment on your vacuum,
or a pole or wire with a
7