Starting your dryer
Push the Start Button.
Your dryer stops automatically when a
Selecting the right cycle and temperature setting
The following pages describe the drying cycles
on your dryer. The descriptions include suggested
temperature settings and drying times for various
Cycle and temperature tips
Models KEYS777E and KGYS777E have a special
Ultra Low temperature setting that reduces drying
temperatures, providing enhanced fabric care for
delicates and other fine fabrics.
In both Automatic cycles (Regular/Heavy and
Permanent Press), the FLO-THRU™ Drying
System automatically reduces the heat near
the end of the cycles to prevent overdrying.
If some types of loads in the cycle descriptions
have more than one suggested temperature
setting, choose the lowest setting available on
The last few minutes of all cycles are without heat
to make the load cooler to handle.
Operating Your Dryer
Stopping and restarting your dryer
You can stop your dryer anytime during a cycle.
To stop your dryer:
Open the dryer door or turn the Cycle Control Knob
The Cycle Control Knob should point to an
Off area when the dryer is not in use.
To restart your dryer:
Close the door, select a new cycle and temperature
(if desired), and push the Start Button.
Make sure you have selected the correct cycle
and temperature for your load. For example, use
the Towels feature for best drying results with
extra heavy items.
Always follow care label directions when they are
Always use fabric softener sheets labeled as
dryer safe and follow package instructions
Remove the load from the dryer as soon as
tumbling stops to reduce wrinkling. This is
especially important for permanent press, knits,
and synthetic fabrics.