Freeing A Stuck Vehicle - Chrysler 2014 200 Owner's Manual

Hide thumbs Also See for 2014 200:
Table of Contents

Advertisement

412 WHAT TO DO IN EMERGENCIES
CAUTION!
Accessories plugged into the vehicle power outlets
draw power from the vehicle's battery, even when not
in use (i.e., cellular phones, etc.). Eventually, if
plugged in long enough without engine operation,
the vehicle's battery will discharge sufficiently to
degrade battery life and/or prevent the engine from
starting.

FREEING A STUCK VEHICLE

If your vehicle becomes stuck in mud, sand, or snow, it can
often be moved using a rocking motion. Turn the steering
wheel right and left to clear the area around the front
wheels. Then shift back and forth between DRIVE and
REVERSE, while gently pressing the accelerator. Use the
least amount of accelerator pedal pressure that will main-
tain the rocking motion, without spinning the wheels, or
racing the engine.
CAUTION!
Racing the engine or spinning the wheels may lead to
transmission overheating and failure. Allow the en-
gine to idle with the transmission in NEUTRAL for at
least one minute after every five rocking-motion
cycles. This will minimize overheating and reduce
the risk of transmission failure during prolonged
efforts to free a stuck vehicle.
NOTE: Press the ESC Off switch, to place the Electronic
Stability Control (ESC) system in Partial Off mode,
before rocking the vehicle. Refer to "Electronic Brake
Control" in "Starting And Operating" for further infor-
mation. Once the vehicle has been freed, press the ESC
Off switch again to restore ESC On mode.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents