Connecting The Ipod® Or External Usb Device; Using This Feature - Chrysler 2014 200 Owner's Manual

264 UNDERSTANDING YOUR INSTRUMENT PANEL
Connecting The iPod® Or External USB Device
Use the connection cable to connect an iPod® or external
USB device to the vehicle's USB connector port which is
located in the center of the instrument panel below the
climate controls.
USB Connector Port
Once the audio device is connected and synchronized to
the vehicle's iPod®/USB/MP3 control system (iPod® or
external USB device may take a few minutes to connect),
the audio device starts charging and is ready for use by
pressing radio switches, as described below.
NOTE: If the audio device battery is completely dis-
charged, it may not communicate with the iPod®/USB/
MP3 control system until a minimum charge is attained.
Leaving the audio device connected to the iPod®/USB/
MP3 control system may charge it to the required level.

Using This Feature

By using an iPod® cable, or an external USB device to
connect to the USB port:
• The audio device can be played on the vehicle's sound
system, providing metadata (artist, track title, album,
etc.) information on the radio display.