Removing Striker Plate
1. Remove 2 long, course-thread, counter-sunk
screws and striker plate. (See Figure 2-24)
2. Set the striker plate to the side for later.
Figure 2-24.
Installation Information
Removing Latch Indicator
1. Grasp the indicator on the latch side
between finger and thumb and rock it
upward, pivoting away from the center of the
glass. (See Figure 2-25)
2. Gently push the indicator toward the center
of the lens to release the tab.
3. Rock the tab upward. (See Figure 2-26)
4. Pull the indicator out and set it aside.
(See Figure 2-27)
Figure 2-25.
Figure 2-26.
Figure 2-27.
2-15