Operating Instructions - Blue Clean AR383L Instruction Manual

• First, remove the plastic shipping cover on the water inlet on the front of the power washer on the
right side. Hand tight is fine. Slide the blue/black collar onto the clear adapter (Fig. 17), it will
"click" into place.
• The water is now connected to your power washer. Turn on water.
• To remove the water hose, simply pull back on the blue collar and it will slide off the clear adapter.
Note: this can be done at any time. Water will not come out of the garden hose as the blue/
black collar has a water stop check valve. Water will only flow from the garden hose when it is
connected to the clear adapter.
You have now completed the assembly of your BLUE CLEAN POWER WASHER and are now
•
ready to begin using your electric power washer. Read and observe all safety instructions.
o i
Perating nStrUctionS
*!Turn on the water supply at the faucet.!*
Powering Up
• Make sure the "ON/OFF" switch is in the "OFF" position. The power switch has international
symbols for 'on' and 'off': On (|) Off (O), (Fig. 18 & Fig. 19).
OFF/0
ON/I
Fig. 18
Fig. 17
OFF/0
ON/I
Fig. 19
13