Blue Clean AR383L Instruction Manual
  1. Manuals
  2. Brands
  3. Blue Clean Manuals
  4. Pressure Washer
  5. AR383L
  6. Instruction manual

Blue Clean AR383L Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Model AR383L
Customer Help Line
1-866-235-5112
WARNING:
before using this product.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
AR383L-92558-AR
2
To reduce the risk of injury, the user must read and understand the instructions
www.arblueclean.com
Instruction Manual

Advertisement

Table of Contents
loading

Related Manuals for Blue Clean AR383L

Summary of Contents for Blue Clean AR383L

  • Page 1 Instruction Manual Model AR383L Customer Help Line 1-866-235-5112 WARNING: To reduce the risk of injury, the user must read and understand the instructions before using this product. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE www.arblueclean.com AR383L-92558-AR...

  • Page 2: Quick Start

    uick tart uide ackage ontent 1. Power washer unit 2. Manual 3. Nozzle cleaning wire (may be taped to the manual) 4. High pressure hose hook 5. Nozzle tray 6. Spray gun holder 7. Screws (1 for nozzle tray / 2 for HP hose hook) 8.
  • Page 3 Press to Press to Lock Unlock Trigger Trigger 7. Attach high pres- 9. Connect lances to spray gun, sure hose to spray insert lance into spray gun, push 8. Push on right side of spray gun to lock gun. together and at the same time twist trigger.

  • Page 4: Table Of Contents

    Volts Amps Weight (lbs) Model (lbs/sq/in) (gal/per/min) AR383L 1,800 122° F imited arranty This product is under warranty to the original retail consumer against defects in material and workmanship for a period of 1 (one) year and is a complete “bumper to bumper” warranty including the spray gun, the high pressure hose and all accessories from the date of purchase.

  • Page 5: Introduction

    Congratulations on the purchase of your BLUE CLEAN POWER WASHER! Your BLUE CLEAN POWER WASHER is a power tool in every sense of the word that may be used outside your house and in. It is one of the finest most powerful home-use power washers in the marketplace today.
  • Page 6 • When you press the power switch to turn off • Never disconnect the high pressure hose the power washer, water pressure may remain from the power washer while the system is in the system. To discharge the pressure, pressurized. point the spray gun in a safe direction and •...

  • Page 7: Package Content

    ackage ontent 1. Power washer unit 2. Manual 3. Nozzle cleaning wire (may be taped to the manual) 4. High pressure hose hook 5. Nozzle tray 6. Spray gun holder 7. Screws (1 for nozzle tray / 2 for HP hose hook) 8.

  • Page 8: Unpacking & Assembly

    NOTE: Some parts may or may not be already assembled. • Install the hose hook on the back of your BLUE CLEAN POWER WASHER (Fig. 1) handle. You’ll notice where the hose hook meets the back of the unit. Place the screws in the holes provided on the high pressure hose hook and screw them in.
  • Page 9 • Extending and lowering the handle (Fig. 4): Extend the handle up by pressing the center of the upper cord hook and pull handle up until it locks in place. NOTE: If handle does not easily slide up, add some lubricant to help make it glide easier. Lowering the handle by pressing the center of the upper cord hook and push down on the handle until all the way down.
  • Page 10 High Pressure Hose Screw the high pressure hose (clockwise) on the left of the unit at the bottom (Fig. 5). Pull back • the collar and insert o-ring post into the water outlet far enough so the collar can thread onto the outlet threads until hand tight.
  • Page 11 the end of the spray gun by inserting and pushing together turning clockwise simultaneously. To remove push together and turn counter clockwise (Fig. 9). Fig. 9 Fig. 10 Remember to always push the safety lock button to lock the trigger when changing lances, to ensure that they do not accidentally eject with force during removal.
  • Page 12 IMPORTANT NOTE: When applying detergent using low pressure spray, the variable spray head must be set for the “Pencil Stream”. This is when the metal blades in front of the nozzle is wide open so the detergent spray is not constricted. •...

  • Page 13: Operating Instructions

    Water will only flow from the garden hose when it is connected to the clear adapter. You have now completed the assembly of your BLUE CLEAN POWER WASHER and are now •...

  • Page 14: How To Clean

    • Unwind the power cord completely and plug the GFCI into a grounded 120 volt outlet. Press the ‘reset’ button on the GFCI box (Fig. 20). The indicator window should show a red color. This must be done each time the unit is plugged in. •...

  • Page 15: Operating Tips And Maintenance

    Perating iPS and aintenance • If you hear the motor run intermittently when the trigger is not being squeezed, that is normal. The pump is priming itself so it is ready to operate when the trigger is squeezed. Turn off the power washer if not being used after five minutes.

  • Page 16: Storage

    • This system applies detergent under low pressure. The cleaning power of the detergents is enhanced when applied with low pressure; and time is allowed to break down the dirt and grime. The combination of low pressure and chemical action is very effective and can be better than scrubbing if applied properly.

  • Page 17: Pump Saver

    Pump Saver is a product that protects and prolongs the life of the pump. This will keep the internal parts of the pump lubricated and protected from freezing while being stored in ALL climates. It also assists with protection from internal corrosion. The Blue Clean part # is: PW64511 (16oz. bottle). Order online at www.arblueclean.com Pump Saver Instructions Follow the previous storage instructions for your power washer.

  • Page 18: Replacement Parts

    ePLacement artS Pos. Description Part Number Qty. Detergent Tank PW4220020 Hose (QC) PW50969 Spray Gun PW50968 High/low Lance/Nozzle PW4220010 Turbo Lance/Nozzle PW50976 Garden Hose Adapter (clear plastic) PW3082130 Garden Hose Adapter (blue/black) PW3082301 GFCI Assembly PW2761401110-1 Pump Spare Part Kits Water Seals &...

  • Page 19: Troubleshooting And Faq

    roUbLeSHooting and Unit will not turn on. Make sure the power washer is in the “OFF” position. Plug in the electrical cord to a grounded 120 volt outlet (no electrical extension cord should be used). If the electrical cord will not plug into your outlet, your electrical outlet is not properly grounded and should not be used.
  • Page 20 Model AR383L Cleaning and troubleshooting tips, manuals and other helpful information are available on our website. For parts and accessories for your Blue Clean Washer, visit www.arblueclean.com. Ordering is easy and all major credit cards are accepted. A.R. NORTH AMERICA, INC.

Table of Contents