Safety Chain Anchors - Venini VEF50EE User Manual

Safety chain anchors

o In order to eliminate the risk of the oven falling forward, two
chains have been installed at the rear of the cooker. Before
use, these will need to be fastened securely to the wall behind
the appliance with the anchor brackets supplied.
o Decide on a suitable wall location for fitting the anchor
brackets directly behind each cooker safety chain.
o Hold the chain anchor up to the wall where it will be required
and mark the fixing holes.
o Drill the fixing holes and fix the chain anchors to the wall
using the screws provided and suitable wall plugs for the type
of wall being fixed to.
o Leave the chains unattached until the installation process has
been completed.
o The cooker is fitted with four feet
that can be adjusted to match
the height of
cabinets.
o If the cooker is not level or is
unstable due to an uneven floor
surface, use the adjustable feet
to alter each corner until the
cooker is level.
23
your kitchen