Orbit timer Manual

Orbit timer Manual

Dual-outlet digital timer

Advertisement

Available languages

Available languages

Quick Links

dual-Outlet dIGItal tImer

SET CLOCK

PROGRAMMING FOR THE
DIGITAL OUTLET OF THE TIMER

START TIME

HOW LONG

Set watering duration from 1 to 240 minutes
using the + and – buttons.

HOW OFTEN

Set watering frequency as every 6 hrs, 12 hrs,

INSTALLING THE bATTERIES

or from 1 to 7 days using the + and – buttons.
Remove the tray on the back of the timer
1 is every day, 2 is every other day etc.
by sliding it out.
up to 7 days.
Insert two AA (1.5V) alkaline batteries
(not included) and replace the tray.

AUTO

Replace batteries when low battery
Timer waters according to programmed time,
icon appears.
station, duration, and frequency.

INSTALLATION

RAIN DELAy

Attach timer to an outdoor hose faucet
and turn on after programming.

PROGRAMMING THE TIMER

Rotate the dial to positions indicated
or setup.
Press station button to switch between
station 1 and 2 for all programming.

MANUAL/HAND WATERING

Press the + button to advance clock time
To water without interrupting the set cycle,
(hold button for quick advance).
press [MANUAL] button and then use + and –
Press the – button to reverse clock time
buttons to set from 1 to 240 minutes.
(hold button for quick reverse).
Press the + button to advance start time
(hold button for quick advance).
Press the – button to reverse start time

TROUbLESHOOTING

(hold button for quick reverse).
Water does not come on at desired time.
Check if:
Timer does not water.
Check if:
When in AUTO, press + button for 24 hrs,
48 hrs, or 72 hrs.
Water won't turn off.
Screen will flash between clock and hours
Check if:
remaining before programmed cycle
resumes.
To remove rain delay, turn dial to OFF
and then back to AUTO.
To remove manual watering (turn off),
turn dial to OFF.
To resume programmed cycle turn the
dial back to AUTO.
Clock is set to correct time including
AM and PM.
Start time is set to desired time including
AM and PM.
Rain Delay is on.
Timer is set to AUTO.
Hose faucet is on.
Batteries are low.
Clock is set to correct time including
AM and PM.
Rain Delay is on.
Orbit
Watering duration is set to desired time.
North Salt Lake, UT 84054
Start times begin after previous
© 2011 Orbit Irrigation Products, Inc.
All rights reserved. All trade names are
watering cycle has run through all
registered trademarks of respective
stations and set durations.
manufacturers listed.
PN 27133-24 rC
WHEN ExPECTING FREEzING TEMPERATURES, TIMERS
SHOULD bE REMOvED FROM THE HOSE bIb TO AvOID
POTENTIAL FREEzE DAMAGE.
®
Irrigation Products, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the timer and is the answer not in the manual?

Questions and answers

Ed Bernstein
July 26, 2025

Is there a way to use the manual setting for station 2? The Manual button won't allow me to change from station 1.

Summary of Contents for Orbit timer

  • Page 1 INSTALLING THE bATTERIES ■ or from 1 to 7 days using the + and – buttons. Remove the tray on the back of the timer Timer does not water. ■ 1 is every day, 2 is every other day etc.
  • Page 2 tempOrIzadOr dIGItal Presione el botón de estación para RAIN DELAy (RETARDO POR LLUvIA) El reloj está programado a la hora correcta ■ ■ cambiar de la estación 1 a la 2 en toda la Cuando esté en modo AUTO, presione el incluso en AM y PM.

This manual is also suitable for:

5690627133

Table of Contents

Save PDF