Holding The Program; Stopping The Program; Clearing The Flashing End; Verifying A Running Program - Thermo Scientific FD1530M Installation And Operation Manual

18
S

Holding the Program

Press the SCROLL button until "T.STAT" is displayed.
1.
Set to "hold" with the UP or DOWN buttons; or from the
HOME DISPLAY, press UP and DOWN arrows together.
2. Press the PAGE button to display Actual temperature.

Stopping the Program

Press the SCROLL button until "T.STAT" is displayed, Set to
"res" with the UP or DOWN buttons.

Clearing the Flashing End

Press the PAGE and SCROLL buttons at the same time.

Verifying a Running Program

Press the SCROLL button until "T.STAT" is displayed. The
display will show "run" if the program is running, "hold" if it is
paused or "res if it is not running. Press the PAGE button to
display actual temperature.
R & D
INGLE AMP WELL
C
ONTROLLER