Shutting The Inverter Off; Operating Normal Loads - Xantrex XPower 175 PLUS Owner's Manual

Overload Shutdown
high (see Table 1 on page 30) or a load that draws excessive
surge power, the XPower shuts down. The red
comes on.
Over Temperature Shutdown
automatically if it exceeds its safe operating temperature. The red
light comes on.
FAULT
High Input Voltage Shutdown
system causes the battery voltage to rise to dangerously high
levels, the XPower shuts down automatically. The red
light comes on.

Shutting the Inverter Off

• If you are going to disconnect the battery, turn the inverter
off first.
• Turn the inverter off using the front panel On/Off switch.

Operating Normal Loads

The XPower is capable of continuously powering most 120-volt
AC products with the following power rating maximums:
If you connect an AC load that is rated too
The XPower shuts down
If a defective battery charging
light
FAULT
FAULT
29