Select "VCR"
4
Using the
to "VCR", then press
Programme
5
Select "Tape Length"
Press the
This information is usually printed on the tape
box. The menu cycles through: E180, E240,
E280 or E300.
Once the type of cassette is set, the VCR can
display the amount of time remaining on the tape
when you press the DISPLAY button.
Programme
42 - English
Downloaded From Disc-Player.com Toshiba Manuals
❷
buttons, move the selection bar
❿
or OK to select.
NICAM
: On
AV 1 Output
: RGB
❿
button to select the Tape Length.
Select "Auto Play"
6
Move the selection bar to "Auto Play," then press
❿
button to select from the following options:
• On - The VCR will automatically begin playing a
video tape when it is inserted, as long as
the safety tab of the cassette has been
removed.
• Off - Auto play is disabled.
Programme
Select "Auto Repeat"
7
Move the selection bar to " Auto Repeat". It sets
the VCR to play a tape repeatedly [unless a tape
control is activated (Stop, Fast Forward or
Rewind).
Programme