Variable Search
System
Press the QUICK button to display the search
screen in the stop mode. When a program is record-
ed, the starting point is given an Index mark for easy
location. However, the VHS Index Search System
(VISS) cannot recognize index marks made by old
VCRs. If the VCR has trouble finding a mark, it is proba-
bly because the cassette was recorded on a VCR with-
out VISS. If you want to index two programs in a row,
set your VCR to stop, then start recording each
program.
Go to [0:00:00] stop
Use this feature when you want to search for the
[0:00:00] counter position on a cassete.
Press the CLEAR button at the point on the tape
1
where you want to set the counter to [0:00:00].
While a cassette is stopped, press the QUICK
2
button.
Select “Go To Zero”, and then press the OK
3
button.
The VCR will rewind or fast forward, search-
ing for the [0:00:00] counter position, and then
Note
automatically stop at that position.