Related Manuals for i3 International VEO48016
Summary of Contents for i3 International VEO48016
-
Page 1: Quick Start Guide
48016 Quick Start Guide ©2011 i³ International Inc. ® INNOVATIONS AT THE SPEED OF THOUGHT The contents of this user manual are protected under copyrights and computer program laws. -
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS • Read and keep the instructions for future reference • Do not use near water. • Clean only with a dry cloth. • Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions. •... -
Page 3: Before Installation
BEFORE INSTALLATION • Installation should be carried out only by qualified personnel and in accord- ance with any electrical regulations enforced at the time. • The DVR must be placed on a stable surface or mounted in an approved cabinet. •... -
Page 4: System Configuration
SYSTEM CONFIGURATION FRONT PANEL DESCRIPTION DESCRIPTION Function Keys POWER Turn On/Off the system power DISPLAY Selects various display modes in live display and playback PTZ/FOCUS Selects PTZ mode in live display MENU Displays the setup menus SEARCH Displays the search menu Control Keys CHANNEL SELECTION Displays individual channels in live display and... -
Page 5: Rear Panel Description
SYSTEM CONFIGURATION REAR PANEL DESCRIPTION A. CAMERA INPUT : Connect up to 16 camera inputs. B. MONITOR : Main BNC monitor. SPOT OUT : BNC Spot monitor. C. AUDIO INPUTS & OUTPUTS : Up to 4 audio inputs and one audio output can be connected as necessary. -
Page 6: Remote Control Description
SYSTEM CONFIGURE – Remote Control REMOTE CONTROL DESCRIPTION Setting ID on the remote control: Press the ID button. This displays the INPUT ID dialog. Press the set ID and Press the RETURN button (The default ID is 01). To return to the previous display, press the ID button again. Input the 255 and press the RETURN button of remote controller. -
Page 7: Connect & Power On
CONNECT & POWER ON • Connect up to 16 CAMERA INPUTS as necessary. • Connect monitors to the DVR using the COMPOSITE or DVI connections • Connect power to the DVR. The DVR checks for proper power connection and emits two beeps on startup. •...