Related Manuals for i3 International Veo16i
Summary of Contents for i3 International Veo16i
- Page 1 Veo16i User Manual Before attempting to connect or operate this product, read these instructions carefully. Save this manual for future use. Rev. 180906...
- Page 2 Furthermore, i3 International Inc. reserves the right to revise this publication, and to make changes to the content at any time, without notice.
-
Page 3: Table Of Contents
Timeline ..............................24 Live View Screen Divisions ........................24 Auto Sequencing ..........................24 PTZ Controls ............................25 PTZ Camera Properties ........................25 Preset Recall ............................26 Creating New Presets .......................... 27 Preset Scan............................27 Revision: 180906 Veo16i User Manual Page | 2... - Page 4 Preset Tour ............................28 Digital Zoom ............................29 Checking Event Log ..........................30 Select Audio Input Channel ........................30 Checking Alarm Status ..........................31 Checking Network Status ........................31 Checking Disk Status ..........................32 Quick Snapshot ............................32 System Setup .............................. 34 Accessing System Setup ........................
- Page 5 Network Streaming ..........................89 Audio Mapping ............................89 Video Search ............................... 90 Accessing Video Search.......................... 90 Search Window ............................91 Playback Window ............................ 92 Archiving ..............................93 New Video Backup ..........................93 Revision: 180906 Veo16i User Manual Page | 4...
-
Page 6: Introduction
18 alarm inputs and 8 alarm outputs for a robust security installation. Full HD 1080P video with audio can be viewed remotely or on a local area network. Veo16i supports VGA and HDMI monitors for local viewing or spot output, while remote viewing can be achieved through the web remote client or through a mobile Smartphone app. -
Page 7: Unpacking
Unpacking > Key Features Unpacking In addition to the fully-assembled Veo16i, the box will contain the following items: Power cable retainer clip (x1) Power Cable (x1) 12V DC Power Adapter (x1) CD (Player, codec, Hard Drive screws (x12) USB Mouse (x1) documentation) 9P Terminal block (x2). -
Page 8: Installation Requirements
DVR Server. If the installation environment does not meet the conditions above, there is a risk of system malfunction. i3 International will only warranty its products if the installation environment meets the conditions above. Should the environmental conditions be not met, the i3 DVR Server warranty will be voided. -
Page 9: Maintenance Recommendations
DVR server. For instructions on how to monitor DVR fan and internal temperature failure events, refer to System Event section. Revision: 180906 Veo16i User Manual Page | 8... -
Page 10: Dvr Components
28. RETURN. Return to the previous menu. 29. LOCK. Lock Veo16i to prevent all operations. 30. ZOOM. Enter the digital zoom mode. Then use Zoom In/Out buttons (#25) -
Page 11: Remote Control
Changes the camera split screen: 1, 2x2, 3x3 or 4x4 Display the DVR log. Switch to sequencing mode KEYLOCK Lock Veo16i to prevent all SNAPSHOT operations. Save a snapshot of the video AUDIO PLAYBACK CONTROLS Display the audio channel Change video playback selection window. -
Page 12: Change Remote Id
Note: For proper display, your main monitor must support 1920 x1080 at 60Hz. 3. Connect Veo16i DVR to the network. Use the RJ45 port on the back of the unit. 4. Connect all analog cameras to the BNC ports on the back of the unit. If using PTZ cameras, connect RS485 communication cable to the corresponding ports on the back of the DVR. -
Page 13: Basic Layout
Installation > Basic Layout Basic Layout Connecting Alarm I/O Your Veo16i DVR supports up to 18 alarm inputs/sensors (16CH + 2CH), pulled up to 5V via 10K Ohm, and up to 8 alarm outputs/controls, relay (125VAC, 60VDC). Revision: 180906 Veo16i User Manual... - Page 14 Installation > Connecting Alarm I/O To connect an alarm input/sensor to your Veo16i DVR, Connect the signal line of an alarm input device such as a sensor to the [ALARM IN] port. 1. Loosen the screws on both the alarm input port and [GND] port of the pre-installed 10P terminal block.
-
Page 15: Connecting Ptz Camera (Rs-485)
Installation > Connecting PTZ camera (RS-485) Connecting PTZ camera (RS-485) To connect the PTZ camera to your Veo16i DVR, 1. Connect PTZ camera’s signal cable to the [D+] port of the 9P terminal block. Insert the signal wire into the hole of the [D+] port and tighten the screw. -
Page 16: Connecting Audio Devices
Installation > Connecting Audio devices Connecting Audio devices Your Veo16i DVR supports up to 16 audio inputs/microphones (10K Ohm, 2.8 Vpp) and 1 audio output (600 Ohm, 2.8 Vpp). 16 RCA connections are provided for audio inputs and 1 RCA connector for audio output on the rear panel of the server. -
Page 17: Storage Hard Drive Requirements
RE or GOLD WD4000FYYZ, WD4001FYYG, WD4002FYYZ RE or GOLD WD6001FSYZ, WD6002FRYZ Network Connection Veo16i DVR can be accessed remotely, via Internet Explorer from a PC on the local or remote network. Local Network Connection Analog Cameras Broadband router or hub Local PC... - Page 18 Broadband router or hub Local PC Local PC 3. On the local PC, open Internet Explorer and enter the IP address of your Veo16i in the address bar, followed by the Web Service Port. Default service port: 8080. E.g. http://192.168.0.59:8080 4.
-
Page 19: Remote Network Connection
Local PC Local PC 1. Connect your broadband router or hub to the ETHERNET port on the rear panel of Veo16i. 2. Connect the ETHERNET port of the router directly to the fixed IP LAN cable, or to the ADSL modem. -
Page 20: Getting Started
Getting Started 1. Follow instructions in the Installation section to connect the Veo16i DVR to peripheral devices and to power. Turn the DVR on. 2. When the system starts, the login screen apspears. Use the USB mouse and the on-screen virtual keyboard to enter USER ID and PASSWORD and click OK. -
Page 21: Set New Password
5. Click APPLY, then click CLOSE to return to the live screen. Set Your Time Zone All i3 international DVRs are set to EST - Eastern Time Zone (GMT-5:00). The time zone of your DVR MUST be set to your local time zone on the first system start up and every time the DVR is relocated to a different time zone. -
Page 22: Logging Out
Getting Started > Logging Out Logging Out When not in use, Log Out of your Veo16i to prevent unauthorized access. 1. On the Live Screen, hover the mouse cursor at the bottom of the screen to display the menu. 2. Click MENU > LOG OUT OR Press LOGOUT on your Remote Control. -
Page 23: Live Screen At A Glance
Indicates reserved (saved) video recording Indicates continuous recording Indicates alarm-triggered recording Indicates motion-triggered recording Indicates emergency recording Active audio signal of the linked camera is detected Motion is detected by the camera Revision: 180906 Veo16i User Manual Page | 22... -
Page 24: Status Bar
Show Digital Zoom mode for the selected channel Capture the current live video and save it in the *.jpeg format. Captured snapshot Snapshot can be saved to HDD or exported to an external USB storage device. Revision: 180906 Veo16i User Manual Page | 23... -
Page 25: Timeline
Click the Sequence button on the status bar or press the [SEQ] button on the remote control to start the pre-set sequence mode. For instructions on how to configure automatic camera sequencing, refer to the Sequence section. Revision: 180906 Veo16i User Manual Page | 24... -
Page 26: Ptz Controls
Set/Go to Preset Force Record View Mode Digital Zoom Zoom/Focus/Iris Scan/Tour Pan/Tilt PTZ Camera Properties To configure PTZ camera’s properties, click the PROPERTY button in the Pan/Tilt panel. PTZ PROPERTY window will be displayed. Revision: 180906 Veo16i User Manual Page | 25... -
Page 27: Preset Recall
To recall an existing preset, use the arrows in the NO. field to select a desired preset then click the GoTo icon next to the NAME field . The camera will move to the preset position. Alternatively, click the GoTo icon next to the corresponding preset in the Quick Access list. Revision: 180906 Veo16i User Manual Page | 26... -
Page 28: Creating New Presets
Note: Preset Scanning and Preset Touring are mutually exclusive features. Only one may be used at-a- time. To set the PTZ camera for preset scanning, 1. In PTZ mode, create at least two presets. 2. In the bottom left-hand corner, in the SCAN/TOUR drop-down menu select SCAN. Revision: 180906 Veo16i User Manual Page | 27... -
Page 29: Preset Tour
3. Next, click the ON button to activate preset scanning. 4. Click on the Properties icon 5. PTZ TOUR window, select up to 16 presets, one for each step of the preset touring. Use the Revision: 180906 Veo16i User Manual Page | 28... -
Page 30: Digital Zoom
ZOOM option from the Quick Menu. 3. In the Digital Zoom mode, use the Zoom In and Zoom Out buttons to control digital zoom of the selected channel. Revision: 180906 Veo16i User Manual Page | 29... -
Page 31: Checking Event Log
Note that when audio-enabled camera is displayed in the Full Screen mode, the linked audio from that camera will be played. Compatible speaker must be connected to the Audio Out port on the rear panel of Veo16i. For more audio settings, refer to the Audio Settings section. -
Page 32: Checking Alarm Status
Connection status of cameras and of remote clients is shown in the NETWORK STATUS window. Click OK to exit NETWORK STATUS window. Refer to Network Status section for more information. Revision: 180906 Veo16i User Manual Page | 31... -
Page 33: Checking Disk Status
1. Select your desired channel on the live screen, right-click and select SNAPSHOT from the Quick Menu. Or click [SNAPSHOT] on the remote control. 2. Connect a storage device to the USB port on the front or rear panel of Veo16i. 3. In the SNAPSHOT window, click EXPORT. - Page 34 USB media or ERASE & BURN to first erase all USB media contents and then save the snapshot. Important: ERASE & BURN option permanently erases all pre-existing data from the USB storage device and cannot be restored once deleted. Revision: 180906 Veo16i User Manual Page | 33...
-
Page 35: System Setup
System Setup > Accessing System Setup System Setup System Setup allows custom configuration of your Veo16i DVR. To access the DVR setup, go to System Setup by using the USB mouse (included) or the remote control (included) Accessing System Setup... -
Page 36: Camera Settings
2. Use the on-screen keyboard to enter new preferred name. (E.g. Main Entrance). Note: Camera title may not exceed 8 alphanumerical characters (UPPER/lower case allowed). 3. Click SHIFT to switch between UPPER and lower case. Click OK to confirm your entry. Revision: 180906 Veo16i User Manual Page | 35... -
Page 37: Image Setup
3. Click DEFAULT to reset all settings back to the factory default values. 4. Click APPLY to save new configurations 5. When done, click CLOSE or press [EXIT] on the remote control. Revision: 180906 Veo16i User Manual Page | 36... -
Page 38: Covert Setup
4. Click APPLY to save new configurations 5. When done, click CLOSE or press [EXIT] on the remote control. Note: CAMERA TITLE of the covert cameras is reset to the default value: CAM##. Revision: 180906 Veo16i User Manual Page | 37... -
Page 39: Motion Sensor
5. Click APPLY to save new configurations 6. When done, click CLOSE or press [EXIT] on the remote control. Note: Motion detection sensitivity may differ depending on the characteristics of the connected camera or the installation environment. Revision: 180906 Veo16i User Manual Page | 38... -
Page 40: Sensitivity Level
Sensitivity Level range is between 1 and 30, where 1 is lowest sensitivity and 30 is the highest sensitivity. By default, both DAYTIME and NIGHTTIME sensitivity levels are set to 15. 4. Click OK to save changes. Revision: 180906 Veo16i User Manual Page | 39... - Page 41 Important: Higher sensitivity during nighttime recording can result in a high number of false alarms. Consider reducing motion sensitivity for nighttime recording. 5. Click OK to exit to previous menu. Revision: 180906 Veo16i User Manual Page | 40...
-
Page 42: Ptz Setup
1. In ACTIVATION column, set privacy mask to ON or OFF for selected cameras. 2. In MASK COLOR column, set the color of the masked area, which will be displayed on the monitor. 3. Click APPLY to save new configurations. Revision: 180906 Veo16i User Manual Page | 41... - Page 43 7. To configure privacy mask for another channel, change the channel in the drop-down menu. 8. Click APPLY to save new configurations. 9. When done, click CLOSE or press [EXIT] on the remote control. Revision: 180906 Veo16i User Manual Page | 42...
-
Page 44: Display Settings
USER NAME: show or hide the name of the currently logged in user on the status bar LANGUAGE: set the system language. English is set by default. Click APPLY to save new configurations. When done, click CLOSE or press [EXIT] on the remote control. Revision: 180906 Veo16i User Manual Page | 43... -
Page 45: Monitor
When done, click CLOSE or press [EXIT] on the remote control. Dual Monitor <SYSTEM SETUP> - <DISPLAY> - <DUAL MONITOR> If using two monitors with your Veo16i DVR (HDMI and VGA), configure your dual monitor settings. Revision: 180906 Veo16i User Manual... -
Page 46: Spot Monitor Setup
1. Set one of the monitors as SPOT 2. Click EDIT under DISPLAY TYPE 3. Your Veo16i DVR supports up to 16 different spot view configuration presets. If the list is blank, start by creating a new custom view type: a. -
Page 47: Sequence
When done, click CLOSE or press [EXIT] on the remote control. To add a new sequence, 1. Click ADD 2. In the ADD window, enter the title for the new sequence and click SAVE Revision: 180906 Veo16i User Manual Page | 46... - Page 48 MODIFY: select a different split screen division or re-arrange the channels in the selected division of your sequence. > DELETE: permanently remove this sequence from the list > CANCEL: cancel changes and return to the previous screen. Revision: 180906 Veo16i User Manual Page | 47...
- Page 49 3. Right-click on one of the screen modes from the list of pre-configured sequences and select MODIFY in the context menu. 4. In SEQUENCE SETUP, make changes to the View Type of channel sequence and click CONFIRM. 8. Click CLOSE. Your sequence has been edited. Revision: 180906 Veo16i User Manual Page | 48...
-
Page 50: Spot Out
<SYSTEM SETUP> - <DISPLAY> - <SPOT OUT> Spot Out setup lets you configure your spot monitor display view. Your Veo16i supports up to 2 BNC spot monitors. Each of the two spot monitors can be configured to show up to 9 channels. - Page 51 3. Right-click on one of the screen modes from the list of pre-configured sequences and select MODIFY or DELETE in the context menu. 4. When done, click CLOSE or press [EXIT] on the remote control. Revision: 180906 Veo16i User Manual Page | 50...
-
Page 52: Audio Settings
> NETWORK AUDIO TRANSMISSION: Enable or disable audio transmission to the remote client PC by turning this option ON/OFF. Veo16i -> Remote Client PC. > RECEIVE NETWORK AUDIO: Enable or disable audio transmission from the remote client PC by turning this option ON/OFF. -
Page 53: Buzzer
> KEYPAD: Enable or disable front panel button sound effect by turning this option ON/OFF. Click APPLY to save new configurations. When done, click CLOSE or press [EXIT] on the remote control. Revision: 180906 Veo16i User Manual Page | 52... -
Page 54: User Settings
System Setup > User Settings User Settings <SYSTEM SETUP> - <USER> Add new users and configure group privileges. Your Veo16i comes with a default ADMIN account with a default password: 1234. For security of your system, change your administrative password. Refer to the section. -
Page 55: Group Authority
Configure user group permissions for MANAGER and USER groups. Note: ADMIN group gets full permissions to the system by default and permissions cannot be customized for that user group. Set group permissions for: Revision: 180906 Veo16i User Manual Page | 54... -
Page 56: Network Settings
When done, click CLOSE or press [EXIT] on the remote control. Network Settings <SYSTEM SETUP> - <NETWORK> Configure your Veo16i Network Settings for remote access, including IP address and port forwarding. Use mouse cursor or the navigation buttons on the remote control (▲▼◀▶/ ENTER) IP Setup <SYSTEM SETUP>... -
Page 57: Ddns
> AUTO PORT UPDATE: Set to ON/OFF to enable/disable automatic port forwarding. You must forward the Veo16i ports when using the router to enable remote DVR access. When AUTO PORT UPDATE function is enabled, Veo16i will automatically (and regularly) update WEB and RTSP ports on the router through UPnP function. -
Page 58: Email
When done, click CLOSE or press [EXIT] on the remote control. Email <SYSTEM SETUP> - <NETWORK> - <EMAIL> Configure Email settings to receive Veo16i alert/alarm events by email. Don’t forget to enable email notification for each user. Refer to User Management section for more information. -
Page 59: Network Status
DDNS registration manually. > EXTERNAL IP ADDRESS: Shows your DVR’s external IP address. Use to connect to your Veo16i from outside of your network via Veo Mobile or IE web browser. Use this template: “http://<External IP Address>:<Web Service Port>”. Note, that the IP address will vary in a dynamic IP environment. -
Page 60: Rtp
Multicasting is a method of sending the same data to multiple unique recipients simultaneously on a local area network. This method cuts down on network “waste”, gets rid of unnecessary strain and is generally used in unrestricted network (Intranet). Revision: 180906 Veo16i User Manual Page | 59... -
Page 61: System Setting
System Setting <SYSTEM SETUP> - <SYSTEM> Set your Veo16i date/time, export/import system settings, view system information and configure remote control ID and/or third-party joystick connection settings (if using). Use mouse cursor or the navigation buttons on the remote control (▲▼◀▶/ ENTER) -
Page 62: Date/Time
> TIMEZONE: Set the DVR to your local time zone. Select your correct time zone from the drop- down list. All i3 international DVRs are set to EST – Eastern Time Zone (GMT -5:00). > DST: If your locale follows Daylight Savings Time, set this feature to ON. -
Page 63: System Management
<SYSTEM SETUP> - <SYSTEM> - <SYSTEM MANAGEMENT> > FW UPDATE: All Veo16i DVRs are shipped with the latest Firmware. In the unlikely event that a newer firmware becomes available during the life cycle of your DVR, a technical bulletin will be released and posted on the i3 Media Library website notifying Veo16i users that a firmware upgrade is available for their DVRs on demand. - Page 64 Default value is: SYSTEM ID. > PASSWORD: Set to ON to allow USER and MANAGER access to Veo16i setup and menus. Set to OFF to lock the unit from all users/user groups except for ADMIN.
-
Page 65: System Information
DVR network information, main monitor resolution and the camera/alarm connection and activation status. When done, click CLOSE or press [EXIT] on the remote control. Control Device <SYSTEM SETUP> - <SYSTEM> - <CONTROL DEVICE> Revision: 180906 Veo16i User Manual Page | 64... -
Page 66: Storage Settings
Storage Settings <SYSTEM SETUP> - <STORAGE> View the storage information of your Veo16i DVR, set the disk overwrite mode, format your storage hard drives, configure RAID1/RAID5 array and set S.M.A.R.T. check interval. Use mouse cursor or the navigation buttons on the remote control (▲▼◀▶/ ENTER) Disk Information <SYSTEM SETUP>... -
Page 67: Disk Operations
IMPORTANT: Fisk formatting PERMANENTLY erases all recorded video data and logs. Video data cannot be recovered after disk format. Click APPLY to save new configurations. When done, click CLOSE or press [EXIT] on the remote control. Revision: 180906 Veo16i User Manual Page | 66... -
Page 68: Disk Configuration
When done, click CLOSE or press [EXIT] on the remote control. To configure a RAID array, 1. Click CREATE ARRAY 2. Use mouse cursor or the navigation buttons on the remote control (▲▼◀▶/ ENTER) to switch between RAID 1 and RAID5 tabs. Revision: 180906 Veo16i User Manual Page | 67... -
Page 69: S.m.a.r.t. Setup
Check the current S.M.A.R.T. information status and set the check frequency. S.M.A.R.T. (Self-Monitoring, Analysis and Report Technology) proactively monitors the health of the hard drives and indicates any problems with a warning message. Revision: 180906 Veo16i User Manual Page | 68... -
Page 70: Event Settings
OPERATION: Set to N/O (Normal Open) or N/C (Normal Close): N/O (Normally Open). Normally Open. Switches to Close when alarm occurs. N/C (Normal Close): Normally Close. Switches to Open when alarm occurs. Revision: 180906 Veo16i User Manual Page | 69... - Page 71 The schedule is laid out as a grid, with each row representing a different Alarm Out connection (Alarm Out ports on the back panel of your Veo16i DVR). Each column represents 1 hour. Alarm Out active schedule can be set by hour but cannot be adjusted to the minute/second.
-
Page 72: Event Notification
BUZZER, DISPLAY, EMAIL and FTP tabs. When an event is detected, Veo16i DVR can notify the user of the event in four different ways: by sounding an on-board buzzer alarm, showing a pop-up message on the screen, sending out an email or saving the event notification to a pre-configured FTP Server. - Page 73 5~300 SEC: Set custom buzzer duration time in seconds, up to 300 seconds (5 minutes) maximum. Display Output When an event occurs, Veo16i can display the linked video channel in single (Full) screen division or show a pop-up message window on screen.
- Page 74 5~300 SEC: Set custom OSD popup duration time in seconds, up to 300 seconds (5 minutes) maximum. Email Output When an event occurs, Veo16i can send out an email notification to the previously registered users. To disable email notification for specific recipients, refer to User Management section and uncheck EMAIL NOTIFY option.
- Page 75 DVR can be set to send out email notifications during business hours only, or during closed hours only. When an event occurs, Veo16i can save the event notification to a pre-configured FTP Server. > FTP SERVER: Click EDIT to configure and test FTP server connection.
-
Page 76: Alarm Sensor
E.g. Two alarming video channels will be shown in a 2x2 screen division. > OSD POPUP: Enable OSD popup notification for selected Alarm Input (sensor). > EMAIL: Enable email notification for selected Alarm Input (sensor). Revision: 180906 Veo16i User Manual Page | 75... -
Page 77: Motion Sensor
BUZZER, VIDEO POPUP, OSD POPUP, EMAIL and FTP notification configurations (Optional). > BUZZER: Enable buzzer alarm notification for motion detection on the selected camera. > VIDEO POPUP: Enable video popup notification for motion detection on the selected camera. Revision: 180906 Veo16i User Manual Page | 76... -
Page 78: Video Loss
Enable one or more video loss event notifications. Refer to Event Notification section for more information on BUZZER, EMAIL and FTP notification configurations (Optional). > BUZZER: Enable buzzer alarm notification for video loss event on the selected camera. Revision: 180906 Veo16i User Manual Page | 77... -
Page 79: System Event
Disk System Events Your Veo16i allows monitoring the health and status of your internal hard drives. Note that this setup does not apply to any external storage drives connected to the DVR via the eSATA or USB port. >... - Page 80 Link the Panic Record Start event with one or more of the connected Alarm Out (Controls/Relays). By linking Alarm Out with a panic record start event, you can activate the connected Alarm Out device when panic recording is initiated by the operator. Revision: 180906 Veo16i User Manual Page | 79...
- Page 81 (Controls/Relays). By linking Alarm Out with DVR booting event, you can be notified of unscheduled DVR reboot events, which may signal recent power outage events. TIP: Remember to use UPS with your Veo16i DVR to maintain your warranty. > LOGIN FAIL EVENT: Link failed login events with one or more of the connected Alarm Out (Controls/Relays).
- Page 82 Email and FTP notifications will be sent once connection is restored. > FAIL IN REMOTE LOGIN: Similar to LOGIN FAIL EVENT. Link Fail in Remote Login event with Revision: 180906 Veo16i User Manual Page | 81...
- Page 83 EMAIL: Enable email notification for selected network event. > FTP: Enable FTP email notification for selected network event. Click APPLY to save new configurations. When done, click CLOSE or press [EXIT] on the remote control. Revision: 180906 Veo16i User Manual Page | 82...
-
Page 84: Record Setup
Record Setup > Accessing Record Setup Record Setup Record Setup allows custom configuration of your Veo16i DVR’s recording. Video recording schedule, frame rate and resolution for individual cameras can be configured in the Record Setup mode. To access the DVR recording setup, go to Record Setup by using the USB mouse (included) or the... -
Page 85: Operation Mode
Next, select one of the available video recording types. Only one recording type can be selected in AUTO CONFIGURATION mode. The selected recording type will apply to all connected video channels and will remain active 24 hours a day, 7 days a week. Revision: 180906 Veo16i User Manual Page | 84... - Page 86 , the DVR will continue recording for the duration set in this option. Available options are: 1 MIN, 5 MIN, 10 MIN, 20 MIN, 30 MIN, 40 MIN, 50 MIN, 60 MIN. Revision: 180906 Veo16i User Manual Page | 85...
-
Page 87: Recording Settings For Motion, Alarm And Motion/Alarm Schedule
Click OK to save recording settings and close pop up window. Click APPLY to save new configurations. When done, click CLOSE or press [EXIT] on the remote control. Revision: 180906 Veo16i User Manual Page | 86... -
Page 88: Recording Settings For "Intensive" Recording Schedules
> POST RECORDING TIME: Set the number of seconds (5~180 sec) appended to the end of the video recording after and alarm event or after the motion has stopped. Revision: 180906 Veo16i User Manual Page | 87... -
Page 89: Panic Recording
AUDIO: Enable or disable camera’s linked audio input. See Audio Mapping to link audio input channels with video cameras. Click APPLY to save new configurations. When done, click CLOSE or press [EXIT] on the remote control. Revision: 180906 Veo16i User Manual Page | 88... -
Page 90: Network Streaming
When done, click CLOSE or press [EXIT] on the remote control. Audio Mapping Link video cameras and Audio Input channels. Click APPLY to save new configurations. When done, click CLOSE or press [EXIT] on the remote control. Revision: 180906 Veo16i User Manual Page | 89... -
Page 91: Video Search
Video Search > Accessing Video Search Video Search Search mode allows reviewing recoded video. Accessing Video Search Using USB mouse Using Remote Control (Method 1) Using Remote Control (Method 2) Revision: 180906 Veo16i User Manual Page | 90... -
Page 92: Search Window
When done, click OK. Step 3. Click PLAYBACK. The PLAYBACK window will be displayed. Note: To exit SEARCH mode and return to LIVE mode, click the CLOSE button in the SEARCH screen. Revision: 180906 Veo16i User Manual Page | 91... -
Page 93: Playback Window
The camera will be maximized on the screen. Double-click on the screen again to return to the multi-screen display. Use the Playback Control panel at the bottom of the screen to control video playback Revision: 180906 Veo16i User Manual Page | 92... -
Page 94: Archiving
The recorded footage is represented by colored bars. The lower portion of the screen offers at- a-glance preview of the video. To export a video clip to a CD/DVD or a USB media, follow these steps: Revision: 180906 Veo16i User Manual Page | 93... - Page 95 Double-click on the TAG NAME field. Using the on-screen VIRTUAL KEYBOARD, enter the backup tag name. When done, click OK in the VIRTUAL KEYBOARD window to close it. Step 9. Click BURN to begin the backup process. Revision: 180906 Veo16i User Manual Page | 94...
- Page 96 Your backup is finished. Remove your backup media: USB or CD/DVD. The backup AVI clips have been saved to your selected media. AVI Player is included with the installation package. Revision: 180906 Veo16i User Manual Page | 95...