Oxy Heli oxy3 Instruction Manual page 29

Tail Servo Assembly.
Nose Left
Tail Push Rod Assembly.
Bottom Heli View
Page 28
Nose Right
Arm position with centered
Rudder stick.
Chapter 17, Servos Installation
Reuse STD
Servo Screw
Tail Push Rod Assembly
Must parallel with arm
position with centered
Rudder stick.
Top Heli View
OXY0092
4X2X4.2 M2
Linkage Ball
OXY0085
Servo Arm
Hex Nut M2
With Tail Servo Arm in
center Rudder Stick
position, adjust Tail Push
Rod length until Tail Bell
Crank and Tail Case Plate
will be parallel, see picture
shown.
Oxy 3 Tail System have
approximately 3.5 of
counter couple extra
pitch with Rudder
centered stick and Tail
Bell Crank set per instructions.