Table of Contents
Advertisement
You can refer to the following figure for cable connection. See Figure 1-2.
Please use the screwdriver to secure the data cable and the combo DVR cable socket. Please
make sure it is firm otherwise it may result in network problem and etc. Then you can use the
Ping command to test the network cable connection status. You need to check the cable
connection if the request time is out.
1.5 HDD Installation
This series 10.2-inch combo DVR has only one 2.5-inch SATA HDD.
You can refer to the Appendix in the user's manual for recommended HDD brand. You can select
the capacity as your requirement.
Please follow the instructions below to install the HDD.
. Turn the screw of the HDD cover and
1
then remove the HDD cover
Figure 1-2
2. Line up the HDD to the HDD slot and then
install
2
Advertisement
Table of Contents
Need help?
Do you have a question about the 10.2-inch Combo Digital Video Recorder and is the answer not in the manual?