Hardware Installation And Connection; Check Unpacked Combo Dvr; About Front Panel And Rear Panel; Device Installation - ClearView 10.2-inch Combo Digital Video Recorder Quick Start Manual

1 Hardware Installation and Connection

Note: All the installation and operations here should conform to your local
electric safety rules.

1.1 Check Unpacked Combo DVR

When you receive the combo DVR from the forwarding agent, please check whether there is any
visible damage. The protective materials used for the package of the combo DVR can protect
most accidental clashes during transportation. Then you can open the box to check the
accessories.
Please check the items in accordance with the list on the warranty card. Finally you can remove
the protective film of the combo DVR.
Note
Remote control is not a standard accessory and it is not included in the accessory bag.

1.2 About Front Panel and Rear Panel

The model in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial
number when we provide the service after sales.

1.3 Device Installation

The series product supports two installation modes: desktop/ wall-mount. The default installation
is the desktop type. Please refer to the following figure. See Figure 1-1.
Figure 1-1

1.4 Data Cable Connection

1