Connection Sample - ClearView 10.2-inch Combo Digital Video Recorder Quick Start Manual

Please refer to the following sheet for front panel button information.
SN Name
1 Remote
receive window.
2 HDD indication light
3 Power indication light
4/5 USB port
6 On/off button
7 Network status indication
light
8 Power socket port
9 Cable port
10 Power socket

1.8 Connection Sample

Please refer to Figure 1-7 for connection sample.
T The following figure is based on the 8-channel series product.
Figure 1-6
Function
control signal It is to receive the signal from the remote
control.
The light is on when systems is reading or
write the HDD data.
The light is on when the device is connected to
the power.
/
When the device is off, press it for a long time
to boot up the device.
When the device is on press it for a long time
to shut down the device.
When the device is off, press it for a short time
to close/open the screen.
/
Connect to DC 12V power
Video CVBS input, audio CVBS input, video
CVBS output, audio CVBS output, RJ45 port.
Alarm input, alarm output, RJ-45 port, RS-232
port.
5