Bypass Pan Mode - Medeli FD900 Owner's Manual

Bypass Pan Mode

There are two function modes to select pan setting
at BYPASS state. When BYPASS, the default
BYPASS pan mode (MODE 1) of the pedal is setting
like these:
STEREO DELAY MODE:
L-OUTPUT = L-INPUT
R-OUTPUT=R-INPUT
The rest modes:
L-OUTPUT= R-OUTPUT=L-INPUT
In MODE 2, BYPASS pan setting of all the delay
modes is the same way as STEREO DELAY under
MODE 1:
L-OUTPUT = L-INPUT
R-OUTPUT=R-INPUT
The default BYPASS pan mode is MODE 1，to
switch it to MODE 2, before making connection or
powers on the pedal, turn the DELAY MODE knob to
the 2 position, then press and hold the FOOT
SWITCH firmly; then power up the unit and keep
holding the FOOT SWITCH until the ON/OFF LED
indicator flashes three times(When using a
aw_FD900_Manual_G07_101105
2010 11 5 16:54:19
Advanced Use
MODE FUNCTION
MODE 1 STEREO DELAY: L-OUTPUT = L-INPUT,
R-OUTPUT=R-INPUT
Rest Delay Modes:
L-OUTPUT= R-OUTPUT=L-INPUT
MODE 2 All the Delay Modes: L-OUTPUT =
L-INPUT, R-OUTPUT=R-INPUT
100
95
75
25
5
0
19