Advanced Use; Footswitch Control Mode - Medeli FD900 Owner's Manual

FOOT SWITCH Control Mode
When DELAY MODE knob points to the M position,
the FOOT SWITCH will provide two function modes.
Before making connection or powers on the padel,
turn the DELAY MODE knob to the M position, then
press and hold the FOOT SWITCH firmly; then
power up the unit and keep holding the FOOT
SWITCH until the ON/OFF LED indicator flashes
three times(When using a battery, press and hold the
FOOT SWITCH firmly, then plug INPUT and keep
holding the FOOT SWITCH until the ON/OFF LED
indicator flashes three times).
The FOOT SWITCH control mode will be changed
from the status of "MODE.1" to "MODE.2". You
can hit the FOOT SWITCH to swap from one patch
to another in sequence.
If you do not press and hold the FOOT SWITCH
before first powers on, the pedal will enter the
default mode MODE1.
Notice:
FOOT SWITCH Control Mode setting will be saved
after power off. Under Mode2, when DELAY MODE
knob points to the M position, PATCH MEMORY
Buttons are not available for pressing.
aw_FD900_Manual_G07_101105
2010 11 5 16:54:19

Advanced Use

MODE FUNCTION
MODE 1 FOOT SWITCH for the bypass function as
usual.
MODE 2 FOOT SWITCH swaps between the patch
memories in the sequence of Button (Patch)
01→02→03→04
100
95
75
25
5
0
17