Advanced Use; Foot Switch Control Mode - Medeli FD500 Owner's Manual

FOOT SWITCH Control Mode

When the MODEL knob points to the M position,
the FOOT SWITCH will provide two function
modes.
Before making connection or powers on FD500,
turn the MODEL knob to the M position, then press
and hold the FOOT SWITCH firmly; powers up the
unit and keep holding the FOOT SWITCH until the
ON/OFF LED indicator flashes three times.
The FOOT SWITCH control mode will now be
changed from the status of "MODE.1" to
"MODE.2". You can hit the FOOT SWITCH to swap
from one patch to another in sequence.
If you do not press and hold the FOOT SWITCH
before FD500 powers on, the FOOT SWITCH
control mode remains the MODE you set before.
Note:
You will not be able to manipulate patches and
their settings under the FOOT SWITCH Control
Mode.
The FOOT SWITCH control mode setting will be
saved when power off.
aw_FD500_Manual_G12_101021
2010 10 21 17:04:36

Advanced Use

MODE FUNCTION
MODE 1 FOOT SWITCH for the bypass
function as usual.
MODE 2 FOOT SWITCH swaps between the
patch memories in the sequence of
Button (Patch)
01→02→03→04→05→06
100
95
75
25
5
0
17