Transport; Controls And Instruments; In Emergency Condition; Central Control Panel - Gianni Ferrari Turbo 1 User Manual

Turbo 1 -2 - 4
Operator's Manual

7 - TRANSPORT

The following operation must be executed with engine switched off.
Lifting must be carried out by fixing
suitable slings in three positions (2 in the
front side of the machine, see picture on the
left; 1 on the rear side, see picture on the
right).
The machine may be transported either
unpackaged or palletized and wrapped in
heat-shrunk polyethylene. It must be firmly
fixed and fastened to the transporter loading
platform.
It is also necessary to ensure that the parking brake is engaged and all wheels are chocked.
8 – CONTROLS AND INSTRUMENTS

IN EMERGENCY CONDITION:

To stop every movement turn the counter clockwise
For blades and turbine movements release the PTO lever.
To stop other movements it is enough leaving the driving control that will return to the neutral position.
As it concerns the emergency braking please see chapter 5.
1 Steering wheel
2 Starter key
3 Central control panel (see following pictures)
4 Side control panel (see following pictures)
5A Parking brake pedal
5B Brake pedal (Turbo 2 only – equipped with
lighting set)
6 Reverse pedal
7 Forward pedal
8 Differential lock
9 PTO engagement lever
10 Throttle lever
11 Hydraulic controls levers (see chapter 10).
12 Mirror (supplied only when the lighting set is
equipped)
13 Speed selection lever (Turbo2 only)

Central control panel

1 Battery alternator
2 Oil pressure
3 Coolant max temperature
4 Oil filter clogging
5 Glow plugs preheating
6 Fuel stock
7
8 Direction indicator
9 Side light (*)
10 Lower beams (*)
11 Start
12 Stop
Page . 8
©GF Gianni Ferrari 10-2001