Technical Features - Gianni Ferrari Turbo 1 User Manual

5 – TECHNICAL FEATURES
Hydrostatic transmission with variable displacement pump
- Front axle with piston hydraulic transmission fixed on the differential gear with final drives in oil bath; differential
lock; disc brakes
- Rear axle with piston hydraulic transmission (Turbo 4 only)fixed on the steering differential gear with cascade final
drives in oil bath
Steering and controls
- Steering wheel with hydraulic power steering;
- Forward and reverse with separate pedals;
- Service brake by means of hydraulic transmission; parking and emergency disc brake controlled by pedal.
- Turbo 4: service brake by means of hydraulic transmission; parking and emergency disc brake controlled by pedal.
- Turbo 2 and Turbo 1: service disc brake on the front wheels controlled by independent pedal.
PTO
- Manual engagement with belt tensioning system;
- Transmission with quick coupling telescopic cardan shaft;
- Automatic safety braking on shaft rotation on disengagement;
- Rotation speed: 2900 rpm.
Front attachment coupling
- 2 arms with 2 cylinder hydraulic lifting system.
Grass collection
- Central intake of cut grass by means of a turbine.
Electrical system
- 12 V 75 Amp battery.
- Electric starter, hour meter
- Safety microswitches
- Grass distributor control motor
- Warning buzzer to indicate full load, reverse motion, elevator operation and collector dumping
OPTIONS
- 1.000 litres capacity, hydraulically lifted grasscatcher (700 litres for Turbo1). Rear automatic opening during
grasscatcher dumping. Internal grass distributor, movable by electrical control. Full load warning buzzer.
- Hydraulic grasscatcher elevator discharging up to 210 cm.
- Lighting set
ACCESSORIES
- 130 or 150 cm. mower deck– Central discharge
- 130 cm. mower deck– Side discharge
-160 cm. mower deck-Rear discharge w/o pick-up
- 150 cm. snow blade
- 100 cm. aerator
©GF Gianni Ferrari 10-2001
For grass collection.
Mechanical gear box in oil bath.
2 disks with 8 articulated impact-proof blades.
130 or 150 cm. cutting width.
Cutting height adjustable from 2 to 9 cm.
Dumping device for cleaning and maintenance operations.
As above with cut grass side discharge.
As above with cut grass rear discharge, 3 disks with 12 articulated
impact-proof blades. 160cm cutting width
150 cm. working width with hydraulic positioning.
With bladed rotor. Working width 100 cm.
Page 6
Turbo 1 - 2 - 4
Operator's Manual