Unloading With Elevator; Cut Grass Direct Discharge - Gianni Ferrari Turbo 1 User Manual

Unloading with elevator

The machine equipped with an elevator (see chapter 18) allows grass
unloading by lifting the grasscatcher up to 210 cm in height.
Operation is achieved by using the lever located on the right side of the
operators seat to operate the grasscatcher hydraulic lift (elevator):
vertical setting is neutral, lift occurs when moving the lever backwards
while the grasscatcher is lowered by moving the lever forwards.
When the grasscatcher reaches the desired height, which can be lower
than the maximum height available, unload it by pulling the central lever
backwards.
Restore working position by proceeding in the opposite way.
ALL THE CHECKING OPERATIONS MUST BE EXECUTED BY EXPERT PERSONNEL. THE
MACHINE MUST BE PLACED ON A LEVEL GROUND WITH THE PTO DISCONNETED
AND WITH THE PARKING BRAKE INSERTED. THE ENGINE (WHERE IT IS NOT
PRECISELY SPECIFIED) MUST BE STOPPED AND THE KEY MUST BE REMOVED.
Always comply with safety rules described for the use of the machine that are:
- Do not allow anyone to get on the machine.
- Operate a safe distance away from persons.
- Keep hands, feet and clothing far from all moving parts.

Cut grass direct discharge

The device that keeps the door opened is equipped with
an intermediate lock, indicated by pos. 1. According to
operator's requirement this lock allows the door to
remain partially opened during work in order to
discharge cut grass from the back.
©GF Gianni Ferrari 10-2001
Page . 15
Turbo 1 -2 - 4
Operator's Manual