The Hydraulic System Is Equipped With 2 Filters; Forward And Reverse Motion Pedal; Hoses And Unions; Parking Brake - Gianni Ferrari Turbo 1 User Manual

The hydraulic system is equipped with 2 filters :

a) an intake filter (picture on the left). When it becomes clogged the 2 following devices will indicate this situation:
- The respective warning light located on the control panel (chapt. 8 Central control panel - Point 4)
- Ring shaped indicator on the filter (side picture point 1). Check is possible only when the engine is running. When
the ring is green this means that the filter is suitable, when it is red the filter is clogged and has to be replaced.
b) a delivery filter (figure in center) placed between the oil tank and the pump
Oil quantity and quality: see chapter 21.

Forward and reverse motion pedal

When they are not depressed, the forward and reverse motion
pedals will be coupled and the machine is at a standstill. If this
does not occur, operate by means of a T-spanner d.13 as shown in
the picture.

Hoses and unions

Hoses and unions do not require any maintenance operation. Check the tightness of the unions where oil leaks occur.

Parking brake

The parking brake is the disc type with mechanical jaw.
Periodically check correct brake operation: engage the brake and
try to move the machine at about 1/4 of the accelerator travel.
Brakes work correctly when the machine stops or advances at a
very low speed. Adjust the jaws when the machine advances with
ease. Adjust control 1 to adjust brake pads.
This operation must be carried out on both the right-hand and the
left-hand brakes.
Replace the disc pads and eventually the discs if worn.
©GF Gianni Ferrari 10-2001
Page . 20
Turbo 1 -2 - 4
Operator's Manual