☛ ☛ ☛ ☛ 7.
Use a coin to remove the screw, and then remove the cover as shown in the
illustration
✒ Note
• The removed screw and cover are no longer required.
☛ ☛ ☛ ☛ 8.
Return the Paper sensor into the Output tray as shown in the illustration.
☛ ☛ ☛ ☛ 9.
Place the Bridge unit on the Output tray and slide the unit along the output
part of the printer.
Downloaded from ManualsPrinter.com Manuals
Fig. 4-77
Fig. 4-78
Fig. 4-79
4-47
CHAPTER 4 OPTIONS