☛ ☛ ☛ ☛ 3.
Remove the adhesive tape and the packing materials.
✒ Note
If the Duplex unit is already installed, the holder is no longer required. Go to
step 8.
☛ ☛ ☛ ☛ 4.
Use a coin to remove the two screws from the right hand side of the printer.
Downloaded from ManualsPrinter.com Manuals
ZAEP420E
Fig. 4-48
ZAEP530E
Fig. 4-49
ZAEP201E
Fig. 4-50
4-31
CHAPTER 4 OPTIONS