☛ ☛ ☛ ☛ 2.
Turn off the printer and remove all cables and cords from the printer.
☛ ☛ ☛ ☛ 3.
Remove the adhesive tape.
!
Caution
Do not remove the adhesive tape (x) holding the cable and the Bridge unit,
until the Bridge unit is attached in step 14.
☛ ☛ ☛ ☛ 4.
If you installed the Duplex unit, open the Duplex unit by lifting the catch.
Downloaded from ManualsPrinter.com Manuals
1
Fig. 4-73
Fig. 4-74
4-45
CHAPTER 4 OPTIONS