Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LSS AR210
Summary of Contents for LSS AR210
- Page 1 PROFESSIONAL AUDIO SYSTEM AR210 OPERATING MANUAL Ver. AR210-EN-1.0 LSS Advanced Speaker Systems Via On. Longo 53-89024 Polistena (RC) ITALY Tel (39) 966 9321299 – Fax (39) 966 933007 Email: info@lss.it - Internet: www.lss.it...
- Page 2 Every precaution has been taken in the preparation of this manual. Nevertheless, LSS assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication.
-
Page 3: Table Of Contents
MOUNTING THE ARRAY ......................... 9 INSTALLATION ON BUMPER ....................... 12 BUMPER AND SYSTEM HANGING ..................... 14 ARRAY SIMULATOR SOFTWARE ....................... 15 ELECTRICAL CONNECTION......................... 16 WEEE DIRECTIVE ............................18 DIMENSIONS ..............................19 TROUBLESHOOTING ..........................20 NOTES ................................21 Operating Manual ver. AR210-EN-1.0 |3... -
Page 4: Introduction
LSS produces professional audio products – the result of exceptional engineering and meticulous craftsmanship. This manual is intended for use with LSS loudspeaker. This includes: safety precautions; installation, set-up and operating instruction. Please read this manual plus any accompanying manual and follow all relevant precautions and instructions. -
Page 5: Safety And Warning
LSS loudspeakers can produce sound levels capable of causing permanent hearing damage from prolonged exposure. The higher the sound level, the less exposure needed to cause such damage CAUTION: This product is energized as long as it is connected to the AC. -
Page 6: Controls And Inspections
The flow rates of suspension accessories provided by LSS are certified by a qualified consultant external to the Company. The original document is available at the LSS office. -
Page 7: Application
AR210 powering mode is Bi-Amp with External Digital Crossover and External Amplifier. The AR210 was designed to support the widest possible range of pro audio applications. the minimum configuration of this system is four enclosures, for full performance eight or more are recommended. -
Page 8: Technical Specifications
Nominal Dispersion (@ -6 Vertical 9° Birch Plywood of 18 mm [0.71 Enclosure material inches] Texture poliurethanic black Finish paint MECHANYCAL Grille Powder coated perforated steel Connectors 2 Neutrik NL4 Speakon Coupling and suspension Accessories hardware (included) 8| Operating Manual ver. AR210-EN-1.0... -
Page 9: Installation And Wiring
______________________________________________________________________________ INSTALLATION AND WIRING AR210 is a line array system designed for vertical curvilinear array that can be used both in flying or stacking configuration. Maximum number of Maximum number of speakers in Flying speakers in Stacking configuration is 12... - Page 10 AR210_________________________________________________________________________________ Rigging holes are in the top and in the bottom of the case: Rear Rigging Holes Front Rigging Holes Overlap the speakers aligning the rigging holes, then secure them with the quick release pins. 10| Operating Manual ver. AR210-EN-1.0...
- Page 11 The bracket for the regulation of inclination (Angle Bar) is in the rear of the case. Plates of two overlapping speakers must be connected via the connecting bracket. Align the holes in the desired position, then secure them with the pins. Operating Manual ver. AR210-EN-1.0 |11...
-
Page 12: Installation On Bumper
Bracket Bottom Speaker’s Plates INSTALLATION ON BUMPER In both Stacking or Flying modes, it is necessary to use the dedicated hardware. Holes for bumper Connecting Bracket suspension Holes for suspension and regulation of inclination Feet 12| Operating Manual ver. AR210-EN-1.0... - Page 13 In case of installation in Flying mode, use the bumper without feet, attach the speaker to the sides via connecting bracket, then connect the rear brackets adjusting the inclination. Operating Manual ver. AR210-EN-1.0 |13...
-
Page 14: Bumper And System Hanging
Inclination value depends from hole and speakers used because of varying the number of speakers, change the center of gravity, so for an exact operation use an inclinometer. 14| Operating Manual ver. AR210-EN-1.0... -
Page 15: Array Simulator Software
- Preset for the areas of listening and the setup of the array. - Display Pressure Levels (SPL). ……………………. *To receive the software or to have more information, contact your LSS distributors or send an email to tech@lss.it. Operating Manual ver. AR210-EN-1.0 |15... -
Page 16: Electrical Connection
For a correct operation, use a 4-poles cable. Two different channels are necessary to make speakers work. One channel for LF and another one for HF. Internal connection are made as follow: Speakon Pinout Transducer connector 16| Operating Manual ver. AR210-EN-1.0... - Page 17 ______________________________________________________________________________ AR210 system operating mode is only Bi-Amp (LF 1- 1+; HF 2- 2+) and needs an external digital processor with custom setup provided by LSS. If your amplifier can manage a 2 Ohms Load and has sufficient power, it is possible to connect a maximum of 6 speaker in parallel (total impedance will be 2 Ohms).
-
Page 18: Weee Directive
Warning: If the product is used for business purposes, the following steps to delete it: contact your LSS dealer for information about the product recall. Might be charged for the costs of collection and recycling. Small products (and amounts) might be taken back by your local collection facilities. -
Page 19: Dimensions
______________________________________________________________________________ DIMENSIONS SIDE FRONT REAR 69,5cm 90cm 90cm BOTTOM Operating Manual ver. AR210-EN-1.0 |19... -
Page 20: Troubleshooting
Poor system hissing, grounding or ground Check and correct the system grounding, as required. humming loop If these suggestions do not solve your problem, contact your nearest LSS dealer or LSS distributor. 20| Operating Manual ver. AR210-EN-1.0... -
Page 21: Notes
______________________________________________________________________________ NOTES Operating Manual ver. AR210-EN-1.0 |21... - Page 22 AR210_________________________________________________________________________________ CONTACT INFORMATION: LSS Advanced Speaker Systems Via On. Longo 53 89024 Polistena (RC) ITALY Tel (39) 966 9321299 – Fax (39) 966 933007 Email: info@lss.it - Internet: www.lss.it 22| Operating Manual ver. AR210-EN-1.0...
Need help?
Do you have a question about the AR210 and is the answer not in the manual?
Questions and answers