Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for LSS SUBSM1
Summary of Contents for LSS SUBSM1
- Page 1 PROFESSIONAL AUDIO SYSTEM SUBSM1 OPERATING MANUAL Ver. SUBSM1-EN-1.1 LSS Advanced Speaker Systems Via On. Longo 53-89024 Polistena (RC) ITALY Tel (39) 966 9321299 – Fax (39) 966 933007 Email: info@lss.it - Internet: www.lss.it...
- Page 2 Every precaution has been taken in the preparation of this manual. Nevertheless, LSS assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication.
-
Page 3: Table Of Contents
INTRODUCTION ............................4 SAFETY AND WARNING ..........................5 APPLICATION ..............................6 PHYSICAL DESCRIPTION ........................... 6 TECHNICAL SPECIFICATIONS ........................7 INSTALLATION AND WIRING ........................8 WEEE DIRECTIVE ............................10 TROUBLESHOOTING ..........................11 DIMENSIONS ..............................12 NOTES ................................13 Operating Manual ver. SUBSM1-EN-1.1 |3... -
Page 4: Introduction
LSS produces professional audio products – the result of exceptional engineering and meticulous craftsmanship. This manual is intended for use with LSS loudspeaker. This includes: safety precautions; installation, set-up and operating instruction. Please read this manual plus any accompanying manual and follow all relevant precautions and instructions. -
Page 5: Safety And Warning
LSS loudspeakers can produce sound levels capable of causing permanent hearing damage from prolonged exposure. The higher the sound level, the less exposure needed to cause such damage CAUTION: This product is energized as long as it is connected to the AC. -
Page 6: Application
APPLICATION LSS'S SUBSM1 is a subwoofer studio monitor system that provides flat response in the 35-150 Hz range The SUBSM1 performs well with SM1 studio monitors loudspeakers to form full-range reproduction systems, and is also compatible with other LSS mid-high loudspeakers. -
Page 7: Technical Specifications
10000 W Nominal Dispersion (@ -6 dB) 360° Birch Plywood of 18 mm [0.71 Enclosure material inches] Texture polyurethanic black Finish paint MECHANYCAL Powder coated perforated steel Grille with anti-dust foam Connectors 2 Neutrik NL4 Speakon Operating Manual ver. SUBSM1-EN-1.1 |7... -
Page 8: Installation And Wiring
IN is the input connector and must be connected to the amplifier, ‘OUT’ is a LINK OUT and can be connected to other systems In the SUBSM1, left speaker is connected to pins 1+/1– of the NL4 connector, while right speaker is connected to pins 2+/2–, this allow to drive the teo speaker with two different channel of amplifier;... - Page 9 ______________________________________________________________________________ Speakon Pinout Transducer connector Left Speaker + Left Speaker - Right Speaker + Right Speaker - You can now use the system Operating Manual ver. SUBSM1-EN-1.1 |9...
-
Page 10: Weee Directive
Warning: If the product is used for business purposes, the following steps to delete it: contact your LSS dealer for information about the product recall. Might be charged for the costs of collection and recycling. Small products (and amounts) might be taken back by your local collection facilities. -
Page 11: Troubleshooting
Poor system hissing, grounding or ground Check and correct the system grounding, as required. humming loop If these suggestions do not solve your problem, contact your nearest LSS dealer or LSS distributor. Operating Manual ver. SUBSM1-EN-1.1 |11... -
Page 12: Dimensions
SUBSM1_______________________________________________________________________________ DIMENSIONS SIDE FRONT REAR 39cm 75cm 75cm BOTTOM 12| Operating Manual ver. SUBSM1-EN-1.1... -
Page 13: Notes
______________________________________________________________________________ NOTES Operating Manual ver. SUBSM1-EN-1.1 |13... - Page 14 SUBSM1_______________________________________________________________________________ CONTACT INFORMATION: LSS Advanced Speaker Systems Via On. Longo 53 89024 Polistena (RC) ITALY Tel (39) 966 9321299 – Fax (39) 966 933007 Email: info@lss.it - Internet: www.lss.it 14| Operating Manual ver. SUBSM1-EN-1.1...
Need help?
Do you have a question about the SUBSM1 and is the answer not in the manual?
Questions and answers