Page 1
PROFESSIONAL AUDIO SYSTEM DG118A OPERATING MANUAL Ver. DG118A-EN-1.1 LSS Advanced Speaker Systems Via On. Longo 53-89024 Polistena (RC) ITALY Tel (39) 966 9321299 – Fax (39) 966 933007 Email: info@lss.it - Internet: www.lss.it...
Page 2
Every precaution has been taken in the preparation of this manual. Nevertheless, LSS assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication.
LSS produces professional audio products – the result of exceptional engineering and meticulous craftsmanship. This manual is intended for use with LSS loudspeaker. This includes: safety precautions; installation, set-up and operating instruction. Please read this manual plus any accompanying manual and follow all relevant precautions and instructions.
LSS loudspeakers can produce sound levels capable of causing permanent hearing damage from prolonged exposure. The higher the sound level, the less exposure needed to cause such damage CAUTION: This product is energized as long as it is connected to the AC.
DG118A_______________________________________________________________________________ APPLICATION LSS's DG118A loudspeaker is a reflex self powered subwoofer dedicated for portable applications or small fixed installations and is ideal to support bass reinforcement of DG300. DG118A system provides high output, low distortion sound reinforcement. This system was designed for a wide range of professional applications.
DG118A must be installed on the floor. It is possible to install more DG118A in stack configuration making fit Top Sub’s feet in bottom sub’s recesses. On the Top of DG118A there is a plate for fixation of a pole, it can be used to install another speaker.
Page 9
120 Hz. P2 – preset 2 (green): indicates the factory presets 130 Hz. P3 – preset 3 (green): indicates the factory presets 140 Hz. P4 – preset 4 (green): indicates the factory presets 150 Hz. Operating Manual ver. DG118A-EN-1.1 |9...
Warning: If the product is used for business purposes, the following steps to delete it: contact your LSS dealer for information about the product recall. Might be charged for the costs of collection and recycling. Small products (and amounts) might be taken back by your local collection facilities.
Need help?
Do you have a question about the DG118A and is the answer not in the manual?
Questions and answers