Page 1
PROFESSIONAL AUDIO SYSTEM PULCE OPERATING MANUAL Ver. PULCE-EN-1.0 LSS Advanced Speaker Systems Via On. Longo 53-89024 Polistena (RC) ITALY Tel (39) 966 9321299 – Fax (39) 966 933007 Email: info@lss.it - Internet: www.lss.it...
Page 2
Every precaution has been taken in the preparation of this manual. Nevertheless, LSS assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication.
LSS produces professional audio products – the result of exceptional engineering and meticulous craftsmanship. This manual is intended for use with LSS loudspeaker. This includes: safety precautions; installation, set-up and operating instruction. Please read this manual plus any accompanying manual and follow all relevant precautions and instructions.
LSS loudspeakers can produce sound levels capable of causing permanent hearing damage from prolonged exposure. The higher the sound level, the less exposure needed to cause such damage CAUTION: This product is energized as long as it is connected to the AC.
LSS's PULCE is an extremely compact and wide range loudspeaker system for high quality distributed system applications. PULCE comprises a single 80 mm (3”) cone driver with 25 mm (1”) voice coil mounted in a sealed enclosure of MDF of 12mm. It can be ordered custom-painted to match décor and is fitted with a perforated steel grille, the cubic cabinet with...
Enclosure material MDF of 12 mm [0.47 inches] Texture poliurethanic black Finish paint, custom on request Suspension U Bracket MECHANYCAL Powder coated perforated steel Grille with anti-dust foam Connectors Black and Red clamps Accessories U-Bracket (included) Operating Manual ver. PULCE-EN-1.0 |7...
PULCE________________________________________________________________________________ INSTALLATION AND WIRING PULCE speaker should be mounted with its own bracket. The bracket must be fixed to the wall through the fixing holes using plugs suitable to support the weight of the entire apparatus. Bracket must be secured to the speaker with the screws on the sides of the case.
Page 9
Caution: Do not exceed the maximum load rating of the amplifier. Usually PULCE is used with PULCEW subwoofer (out for PULCE with crossover network at 180Hz 6dB/oct), an example of recommended configuration (PULCEW in stereo mode, 2 PULCE per out) using multiple...
Page 10
PULCE________________________________________________________________________________ You can now use the system 10| Operating Manual ver. PULCE-EN-1.0...
Warning: If the product is used for business purposes, the following steps to delete it: contact your LSS dealer for information about the product recall. Might be charged for the costs of collection and recycling. Small products (and amounts) might be taken back by your local collection facilities.
Poor system hissing, grounding or ground Check and correct the system grounding, as required. humming loop If these suggestions do not solve your problem, contact your nearest LSS dealer or LSS distributor. 12| Operating Manual ver. PULCE-EN-1.0...
Need help?
Do you have a question about the PULCE and is the answer not in the manual?
Questions and answers