Hot/Warm Phone (V2) - Siemens Asterisk OpenStage 15 Administration Manual

administration.fm
Administration
Features - Configuration
3.5.2

Hot/Warm Phone (V2)

With firmware version V2, hot/warm phone functionality is available. If the phone is configured
as hot phone, the number specified in Hot warm destination is dialed immediately when the
user goes off-hook. For this purpose, Hot warm phone must be set to "Hot phone". If set to
"Warm phone", the specified destination number is dialed after a delay which is defined in Au-
todial delay (seconds) in the user menu. During the delay period, the user can dial a number
which will be used instead of the hot/warm destination. In addition, the user will be provided
with a dial tone during the delay period. With the setting "No action", hot phone or warm phone
functionality is disabled.
Administration via WBM
System > Features > Configuration
(User menu) > Configuration > Outgoing calls
A31003-S2000-M102-3-76A9, 08/07/2009
3-54
Asterisk - OpenStage Family, Administration Manual