Makita LS1212 Instruction Manual page 19

6. Cutting crown and cove moldings
C r o w n and cove moldings can be cut on a compound miter saw with the moldings laid
flat on the turn base.
*There are two common types of crown moldings and one type of cove moldings;
!52/38" wall angle crown molding, 45" wall angle crown molding and 45" wall angle
cove molding. See illustrations below.
Ceiling Ceiling
52138~
type
45"
type
crown
molding
crown
molding
Ceiling
45"
type
cove molding
ol-here are crown and cove molding joints which are made to fit "Inside" 90" corners
(0
and @in Fig. C ) and "Outside" 90" corners
(0
and
@
in Fig. C ) .
Inside corner Outside cornel
Fig. (C1
Inside corner
19