Setting 'Line Status'; General Section - Yeastar Technology Digium Configuration Manuals

feature code is set in MyPBX's web GUI. Let's say we set the feature code as
10000, we can enter "10000" here.
Setting "Line status" in other lines: before register, you should enable "line
status".
6. We now need to set the phone to register with MyPBX. Click "Line1" tab, and in
the "General" section, configure as follows:
1) User ID/Extension: the extension's number, such as 105
2) Authorization Name: same to extension's number
3) Line Label on Phone: the label displayed on the phone, you can
customize it or same to extension's number
4) Caller ID Name: the extension's caller ID, such as 105 in this guide
5) Digitmap: leave it as default settings
6) Register: set "Register" as "YES"
7) Password: enter the password of the extension you want to register
7. Setting "Host" as follows:
www.yeastar.com
Digium IP Phone Configuration Guides
Figure 3 Setting "Line Status"
Figure 4 General Section
Page 3