Fanvil IP Phone Configuration Guide Yeastar Technology Co., Ltd.
Page 2
Fanvil IP Phone Configuration Guides Table of Contents CONFIGURING WITH MYPBX ..............3 CONFIGURING TO USE IAX2 ON FANVIL ..........6 www.yeastar.com Page 2...
Configuring Fanvil IP phone with MyPBX This guide is applicable to Fanvil C62/C60/C58/C56. Please note: This guide has been tested for Fanvil C62 with firmware version 2.2.0.0. Be aware that different firmware versions may have different web interface formats and functionality.
Fanvil IP Phone Configuration Guides Click on the "VOIP" tab on the left side. Register SIP extension We now need to set SIP phone to register with MyPBX. Click “SIP” tab, ensure that the "SIP Line" field is set to "SIP 1", and in the "Basic Settings" section,...
Fanvil IP Phone Configuration Guides Figure 3 SIP Line Codecs Settings Click the "Apply" button at the bottom of the page. The phone will now register with MyPBX. This can be verified via the “Status" page of MyPBX Management Console.
Page 6
MyPBX. This can be verified via the “Status" page of MyPBX Management Console. Configuring to use IAX2 on Fanvil Click on the "Function Key" tab on the left side to enter the page. You can configure a “Line Key” or “Function Key” to activate IAX2 line. The default function of the 4 “Line key”...
Page 7
Fanvil IP Phone Configuration Guides Figure 5 Configuring DSS Key4 to activate IAX2 Line Click the "Apply" button at the bottom of the page. And the function of “DSS Key4” on the phone is to activate IAX2 line. <End> www.yeastar.com...