Related Manuals for Yeastar Technology HTEK
Summary of Contents for Yeastar Technology HTEK
- Page 1 Htek IP Phone Configuration Guide Version 1.0 Date: 2016.09.19 Yeastar Information Technology Co. Ltd.
- Page 2 Provisioning Htek Phones via DHCP Supported Phone Models Htek UC Series: 802, 803, 804, 840, 842, 806, 860, 862, 902, 903, 923, 924, 926 Note: different IP phone firmware versions may have different web GUI with different settings.
- Page 3 Htek IP Phone Configuration Guide Registering to Yeastar S-Series Manually If you choose registering Htek to Yeastar S-Series manually, you have to log in each phone, and configure one by one. 1. Log in the Htek IP phone web user interface.
- Page 4 Htek IP Phone Configuration Guide Account: choose one account. Account Active: Yes Primary SIP Server: fill in Yeastar S-Series PBX’s IP address. SIP Transport: choose “UDP”. The default SIP transport on Yeastar S-Series is UDP. Label: set the name you want to appear on the phone display.
- Page 5 Htek IP Phone Configuration Guide Provisioning Htek Phones via PnP Before provisioning the phones, you must reset the phones to factory defaults in case that the phones have residual settings of a previous configurations. 1. Connect the phone to the same network with Yeastar S-Series PBX. The phone will send a PnP request to the PBX when booting up.
- Page 6 Htek IP Phone Configuration Guide 5. Click “Save”. 6. The system prompts you to reboot the phone, click “OK”. The phone will reboot and configure automatically.
- Page 7 Htek IP Phone Configuration Guide Provisioning Htek Phones via DHCP Before provisioning the phones, you must reset the phones to factory defaults in case that the phones have residual settings of a previous configurations. 1. Connect the phone to the same network with Yeastar S-Series PBX.
- Page 8 Htek IP Phone Configuration Guide 4. Go to “Auto Provisioning” App. Click “Scan”, all the phones in the local network will show up on the page. 5. Search the phone by MAC address or IP address, and click “edit”. 6. Choose the phone Model, active a line and assign an extension for the phone.
- Page 9 Htek IP Phone Configuration Guide 7. Click “Save”. 8. The system prompts you to reboot the phone, click “OK”. The phone will reboot and configure automatically.