This guide has been tested for Digium D70 with firmware version 1_0_0_44308. Be aware that different firmware revisions may have different web interface formats and functionality. Register with MyPBX Digium D70 is a POE IP phone. Start up the phone and identify its IP Address – press Menu->Admin Settings->enter...
Page 3
Digium IP Phone Configuration Guides feature code is set in MyPBX’s web GUI. Let’s say we set the feature code as 10000, we can enter “10000” here. Figure 3 Setting "Line Status" Setting “Line status” in other lines: before register, you should enable “line status”.
Page 4
Digium IP Phone Configuration Guides Figure 5 Host Section 1) IP Address or Hostname: the IP or hostname of your MyPBX, in this guide 192.168.5.138 2) Port: SIP port of your MyPBX, in this guide 5060 3) Transport: the transfer protocol the extension use, in this guide UDP Click the button “Submit Phone Settings”, and the phone will register to your...