Yeastar Technology Tiptel 31 Configuration Manual
  1. Manuals
  2. Brands
  3. Yeastar Technology Manuals
  4. IP Phone
  5. Tiptel 31
  6. Configuration manual
Yeastar Technology Tiptel 31 Configuration Manual

Yeastar Technology Tiptel 31 Configuration Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Tiptel 31XX IP Phone

Configuration Guide

Yeastar Technology Co., Ltd.

Advertisement

Table of Contents
loading

Related Manuals for Yeastar Technology Tiptel 31

Summary of Contents for Yeastar Technology Tiptel 31

  • Page 1: Configuration Guide

    Tiptel 31XX IP Phone Configuration Guide Yeastar Technology Co., Ltd.
  • Page 2 Tiptel 31XX IP Phone Configuration Guide Table of Contents Introduction ..................... 3 Register with MyPBX Manually ..............4 Configuring BLF on Tiptel 31xx..............7 Auto Provisioning ..................8 www.yeastar.com Page 2...

  • Page 3: Introduction

    Tiptel 31XX IP Phone Configuration Guide Introduction This guide has been tested with Tiptel 3110, 3120, 3130 (firmware version 2.0.145). Be aware that different firmware revisions may have different web interface formats and functionality. The preferred method to configure a Tiptel 31xx Phone is via Provisioning.

  • Page 4: Register With Mypbx Manually

    Tiptel 31XX IP Phone Configuration Guide Register with MyPBX Manually 1. Start up the phone and identify its IP address-press the OK key on the phone to get the Information. For this example the IP address of the phone is 192.168.5.126, and IP address of MyPBX is 192.168.5.150. 2.

  • Page 5: Figure

    Tiptel 31XX IP Phone Configuration Guide Figure 1-2 1) Set the "Active" field to "Enabled". 2) Set the "Label" field to the name you want to appear on the Phone display. 3) Set the "Display Name" field to the name you want to appear on another phone's display when calling other phones.
  • Page 6 Tiptel 31XX IP Phone Configuration Guide 6. Next, we need to configure the audio codecs. Click on the "Account/Codec" tab. Ensure that the "Enable codecs" list box contains first "G722", then "PCMU", and finally "PCMA". Click the "Confirm" button at the bottom of the page.

  • Page 7: Configuring Blf On Tiptel 31Xx

    Tiptel 31XX IP Phone Configuration Guide Configuring BLF on Tiptel 31xx Note: 1. Only PSTN and GSM trunk are allowed to be monitored currently in MyPBX. 2. Please choose the right line number. Make sure you have chosen the right one, which is registered to MyPBX 3.

  • Page 8: Auto Provisioning

    Tiptel 31XX IP Phone Configuration Guide Auto Provisioning This part is about provisioning a Tiptel 3110/3120/3130 in MyPBX. This guide has been tested with Tiptel 3110, 3120, 3130 (firmware version 2.0.145). The easiest way to set up a Tiptel 31xx phone for MyPBX is to use the built-in plug and play provisioning functionality inside MyPBX.
  • Page 9 Tiptel 31XX IP Phone Configuration Guide Step3. Search the MAC address you would like configure on the “Phone Provisioning”  ”Not Configured Phone” page. Figure 3-3 In this case, the MAC address of Tiptel 31xx IP phone is 000cc4300000. Figure 3-4 Fill in the phone detail message on the pop-up window.

  • Page 10: Www.yeastar.com

    Tiptel 31XX IP Phone Configuration Guide Figure 3-5 Step4. Save the settings and reboot the IP phone. After you save the changes, the system will prompt you to save the changes and reboot or save changes without rebooting. Click "OK" to reboot the IP phone and provisioning the phone.

This manual is also suitable for:

Tiptel 31 series

Table of Contents